2) Standing usage
When the cover is open the user can open the seat manually or by remote. The toilet will automatically flush when the
user leaves the toilet for a period of time. The cover and seat will close after about 2 minutes of disuse.
Note:
1. User shall be able to use remote to control flush water or manual flush water, or use in-wall tank
faceplate buttons to flush the toilet if auto flush function is OFF.
2. Auto flush function shall be effect when remote "flush setting" is "ON" (Refer to Page 8 for setting).
B. Flush controlled by remote
Customer shall be able to perform toilet flush function by pressing flush FULL or ECO button on remote.
Note: Remote flush function shall not execute twice before complete flushing process .
C. Flush by waving detection on flush control board
Customer shall be able to control flush full or flush ECO by waving hand
over the in-wall tank faceplate.
D. Flush by manual pressing
When power is OFF, auto flush is deactivated.
Press manual flush button on flush control board:
Left button: flush full
Right button: flush ECO (half flush)
1274372-A05-B
June 2016
Flush Full detection zone
Flush ECO detection zone
Flush ECO button
12
11 12
1
10
2
9
3
8
4
7 6
5
2min
Flush Full button
Kohler Co.