Cleaning Air Filter And Motor Safety Filter - LG VK8914DCAQ Owner's Manual

How to use
Indicator on hose is flickering for 1 minute, it sounds "Ddilililing ~ Dding~ ddilililing~" like a buzzer from vacuum
body. In 30 seconds, suction power will decrease, it stops operating automatically.
If suction power is decreased after cleaning dust tank or indicator light
is on, clean air filter and motor safety filter.
Air filter and motor safety filter are located at the up of vacuum cleaner
in the above figure.
• Push the vacuum cover button, open the body cover.
• Hold dust separator handle and pull it upward.
• Open the guide cover by pulling the guide cover lever and remove
the dust.
• Open prefilter cover.
• Pull out the air filter and motor safety filter.
• Clean air filter and motor safety filter with running water.
• Do not wash filters with hot water.
• Eliminate water thoroughly
• Dry it under well-ventilated shade for a day.
• The air filter and the motor safety filter should be cleaned as above
the figure.

Cleaning air filter and motor safety filter

Indicator
Dust separator
Guide cover
Air filter
NOTICE
If filters are damaged, do not use them.
In this cases, contact LG Electronics
Service Agent.
Wash filters at least every 3 months.
Pre-filter
cover
Motor safety filter
17