Table of Contents
Advertisement
Recording a Programme with Automatic Stop
GB
This function enables you to record up to nine hours (LP) of
programmes.
Your VCR stops automatically after the requested length of time.
1
2
3
3
A.TRK
IPC
INPUT
4
REPEAT
4
AUDIO
DISPLAY
TRK
4
PROG
4
5
6
SPEED
DUB
TV/VCR
TIMER
5
7
REC
MENU
6
8
OK
LENGTH 2:30
SET LENGTH :
PRESS
REC
24
Switch on the television.
To monitor the programme being recorded, select the television
channel reserved for use with your VCR (or the AV input if used).
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result:
The VCR is switched on automatically.
Select:
The station to be recorded using the PROG (" or ❷) buttons
or
The AV1, AV2 or AUX (SV-645B only) source using the
INPUT button for a satellite tuner or external video source
Result:
The channel number is displayed and the programme
can be seen on the television.
Select the recording speed by pressing the SPEED button as
many times as required (see page 21).
Hold the REC button down for a while to start recording.
Result:
The record indicator appears on the television screen
and VCR display. An index is recorded on the tape
(see page 35).
Press the REC button several times to increase the recording time
in:
30-minute intervals up to four hours
1-hour intervals up to nine hours (LP)
Result:
The length is displayed on the television displays. The
selected programme is recorded for the length of time
requested. At the end of that time, the VCR stops
recording automatically.
If you wish to cancel the recording before the end, press
STANDBY/ON.
If the end of the tape is reached while recording:
The recording stops
The VCR automatically turns off
Advertisement
Table of Contents
