Table of Contents
Advertisement
Playing a Sequence Frame by Frame
You can:
Stop the cassette at a given frame (image)
TRK
PROG
Advance one frame at a time
No sound is heard when playing back frame by frame.
1
Press:
❿
ll to start playing the cassette
REC
1
MENU
❿
ll to stop the tape at a given frame
F.ADV (
2
To return to normal playback, press
When you have been using the Frame-by-Frame function
for more than about five minutes, the VCR will auto-
matically play to protect the cassette and video heads.
Vertical stability: When playing back frame by frame,
interference may be seen on the screen. Press the
V-LOCK (
Picture Search, Fast Forward/Rewind
Picture Search enables you to Fast Forward or Rewind and look for
a particular part of a tape.
1
Press PLAY, the VCR will enter normal play mode. While in play,
press and release the
times the normal playback speed.
2
To return to normal playback mode, press the
3
If you press and HOLD down the
search at 9 times the normal speed. Releasing the
return the VCR to search at 5 times the normal speed. To return to
normal playback mode, press the
4
Whilst in Picture Search mode, if you press the
the VCR will enter normal Fast Forward mode.
5
Likewise, whilst in Picture Search
button again, the VCR will enter normal Rewind mode.
6
If, when Redwing (
❿ ❿
(or
) button, the VCR will enter the Picture Search mode.
34
F.ADV
) to advance frame by frame
❿
ll.
V-LOCK
) buttons to minimize this effect.
❿ ❿
(or
➛ ➛
) button. The VCR will search at 5
❿ II
button.
❿ ❿
(or
➛ ➛
) button the VCR will
❿ ❿
button will
❿ II
button.
❿ ❿
button again,
➛ ➛
➛ ➛
mode, if you press the
➛ ➛
) or Fast Forwarding (
❿ ❿
), you press the
➛ ➛
Searching for a Specific Sequence
Each time you record a cassette on this VCR, an "index" is
automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows:
Prev
Seq. being
Next
etc.
Seq.
played
Seq.
etc.
2
1
1
2
This VCR uses a standard indexing system (VISS). As a
result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.
INTRO SCAN
1
To search for a specific index, press INDEX.
2
Press the
➛ ➛
❿ ❿
or
buttons depending on the direction
where your desired programme is located.
3
When an Index mark is found the VCR will playback the tape for 5
seconds, after which it will continue searching for the next Index
mark.
4
If you want to watch the tape from a particular Index, simply press
❿ II
.
Index Skip Search:
This feature will enable you to fast forward/rewind to a specific
point on a tape: E.g. if you have recorded 3 different programmes
on a tape and you have rewound the tape to the beginning, by
using this feature you can go directly to the start of programme 2
simply by pressing the INDEX button.
1
Press the INDEX to start the Index search.
2
Press the
➛ ➛
or
❿ ❿
buttons twice more. This will take
you directly to the start of the desired programme is located.
3
These Index searches can be made forwards: (press
➛ ➛
backwards: (press
).
❿ II
4
To cancel an Index search simply press the
or
V-LOCK
CLR/RST
F.ADV
INDEX
1
A.TRK
IPC
INPUT
REPEAT
INDEX:
➛ ➛!!!!!❿ ❿
INDEX SEARCH:
❿ ❿!!!!
+01
❿ ❿
) or
button.
35
GB
Advertisement
Table of Contents
