Sony WH-H800 Reference Manual

Wireless Stereo
Reference Guide
Headset
WH-H800
The Bluetooth® word mark and logos are
A
registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such
marks by Sony Corporation is under license.
The N-Mark is a trademark or registered
trademark of NFC Forum, Inc. in the United
States and in other countries.
Windows is a registered trademark or
trademark of Microsoft Corporation in the
United States and/or other countries.
Apple, iPhone, iPod, iPod touch, macOS and
Mac are trademarks of Apple Inc., registered
in the U.S. and other countries.
Use of the Made for Apple badge means that
B
an accessory has been designed to connect
specifically to the Apple product(s) identified
in the badge, and has been certified by the
developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance

with safety and regulatory standards.
Qualcomm® is a trademark of Qualcomm
Incorporated, registered in the United States
and other countries, used with permission.
Qualcomm aptX™ audio is a trademark of
Qualcomm Technologies International, Ltd.,
registered in the United States and other
countries, used with permission.
Android is a trademark of Google LLC.
Other trademarks and trade names are those
of their respective owners.
Precautions
On BLUETOOTH communications
• BLUETOOTH wireless technology operates

within a range of about 10 m. Maximum
communication range may vary depending
on obstacles (human body, metal, wall,
etc.) or electromagnetic environment.
• The antenna is built into the unit as
illustrated in the dotted line (Fig. ). The
C
sensitivity of the BLUETOOTH
communications will improve by turning
the direction of the built-in antenna to the
connected BLUETOOTH device. When
obstacles are between the antenna of the
connected device and the built-in antenna
of this unit, noise or audio dropout may
occur, or communications may be
disabled.
• BLUETOOTH communications may be
disabled, or noise or audio dropout may
occur under the following conditions.
– There is a human body between the unit
and the BLUETOOTH device.
This situation may be improved by
placing the BLUETOOTH device facing
the antenna of the unit.
– There is an obstacle, such as metal or
wall, between the unit and the
BLUETOOTH device.
– A device using 2.4 GHz frequency, such
as a Wi-Fi device, cordless telephone, or
English microwave oven, is in use near this unit.
• Because BLUETOOTH devices and Wi-Fi
(IEEE802.11b/g/n) use the same frequency
Do not install the appliance in a confined
(2.4 GHz), microwave interference may
space, such as a bookcase or built-in cabinet.
occur resulting in noise or audio dropout
Do not expose the batteries (battery pack or
or communications being disabled if this
batteries installed) to excessive heat such as unit is used near a Wi-Fi device. In such a
sunshine, fire or the like for a long time.
case, perform the following.
Do not dismantle, open or shred secondary – Use this unit at least 10 m away from the
cells or batteries. Wi-Fi device.
In the event of a cell leaking, do not allow – If this unit is used within 10 m of a Wi-Fi
the liquid to come in contact with the skin or device, turn off the Wi-Fi device.
eyes. If contact has been made, wash the – Install this unit and the BLUETOOTH
affected area with copious amounts of water device as near to each other as possible.
and seek medical advice. • Microwaves emitting from a BLUETOOTH
Secondary cells and batteries need to be device may affect the operation of
charged before use. Always refer to the
electronic medical devices. Turn off this
manufacturer's instructions or equipment unit and other BLUETOOTH devices in the
manual for proper charging instructions.
following locations, as it may cause an
After extended periods of storage, it may be accident:
necessary to charge and discharge the cells – where inflammable gas is present, in a
or batteries several times to obtain hospital, or a petrol station
maximum performance. – near automatic doors or a fire alarm.
Dispose of properly. • This product emits radio waves when used
in wireless mode.
When used in wireless mode on an
airplane, follow flight crew directions
regarding permissible use of products in
wireless mode.
• Due to the characteristic of the wireless
TRA
technology, the sound played on this unit
is delayed from the sound and music
REGISTERED No: ER55317/17
played on the sending device. Therefore,
the image and sound may be misaligned
DEALER No: DA0096946/12
when viewing a movie or playing a game.
• This unit supports security capabilities that
comply with the BLUETOOTH standard to
The LDAC™ name and logo is a trademark of
provide a secure connection when the
Sony Corporation.
BLUETOOTH wireless technology is used,
but security may not be enough
©2017 Sony Corporation
Printed in Malaysia
4-698-090-32(1)
depending on the setting. Be careful when
communicating using BLUETOOTH wireless
technology.
• We do not take any responsibility for the
leakage of information during BLUETOOTH
communications.
• Connection with all BLUETOOTH devices
cannot be guaranteed.
– A device featuring BLUETOOTH function
is required to conform to the BLUETOOTH
standard specified by Bluetooth SIG, Inc.
GB
and be authenticated.
– Even if the connected device conforms
CT
to the above mentioned BLUETOOTH
standard, some devices may not be
connected or work correctly, depending
KR
on the features or specifications of the
device.
– While talking on the phone hands free,
noise may occur, depending on the
device or communication environment.
• Depending on the device to be connected,
it may require some time to start
communications.
If sound skips frequently during
playback
• The situation may be improved by setting
the sound quality mode to "priority on
stable connection." For details, refer to the
Help Guide.
• The situation may be improved by
changing the wireless playback quality
settings or fixing the wireless playback
mode to SBC on the transmitting device.
For details, refer to the operating
instructions supplied with the transmitting
device.
• If you are using a smartphone, the
situation may be improved by shutting
down unnecessary applications or
rebooting the smartphone.
On the use of calling apps for
smartphones and computers
• This unit supports normal incoming calls
only. Calling apps for smartphones and
computers are not supported.
On charging the unit
• This unit can be charged using USB only.
Personal computer with USB port is
required for charging.
• This unit cannot be turned on, nor can the
BLUETOOTH function be used, during
charging.
• You can use the unit by connecting the
supplied headphone cable, even while
charging the unit.
• If you do not use the unit for a long time,
the rechargeable battery may not be able
to keep sufficient charge. The battery will
be able to keep a charge properly after
repeatedly discharging and charging
several times.
• If you store the unit for a long time, charge
the battery once every half year to prevent
over-discharge.
• If the length of time you can use the unit
became extremely short, the rechargeable
battery should be replaced with a new
one. Please contact your nearest Sony
dealer for a battery replacement.
Note on static electricity
• Static electricity accumulated in the body
may cause mild tingling in your ears. To
minimise the effect, wear clothes made
from natural materials.
If the unit does not operate properly
• Reset the unit (Fig. ).
Press the  and  buttons simultaneously
while charging. The unit will be reset.
Pairing information is not deleted.
• If the problem persists even after the
resetting operation above, initialize the
unit as follows.
Disconnect the micro-USB cable from the
micro-USB port, turn off the unit, then hold
down the  and  buttons
simultaneously for more than 7 seconds.
The indicator (blue) flashes 4 times, and
the unit is reset to the factory settings. All
pairing information is deleted.
• After the unit is initialized, it may not
connect to your iPhone or computer. In this
case, delete the pairing information of the
unit from the iPhone or computer, and
then pair them again.
Others
• Be careful not to catch your finger in the
unit when folding.
• When you use the unit as wired
headphones, use the supplied headphone
cable only. Make sure that the headphone
cable is firmly inserted.
• Do not place this unit in a place exposed to
humidity, dust, soot or steam, or subject to
direct sunlight. Do not leave the unit in a
car for a long time. It may cause a
malfunction.
• Using the BLUETOOTH device may not
function on mobile phones, depending on
radio wave conditions and location where
the equipment is being used.
• High volume may affect your hearing.
• For traffic safety, do not use while driving
or cycling.
• Do not use the unit in places where it
would be dangerous if you are unable to
hear ambient sound, such as at railroad
crossings, train station platforms, and
construction sites.
• Do not put weight or pressure on this unit
as it may cause the unit to deform during
long storage.
• Do not subject the unit to excessive shock.
• Clean the unit with a soft dry cloth.
• Do not expose the unit to water. The unit is
not waterproof.
Remember to follow the precautions
below.
– Be careful not to drop the unit into a sink
or other container filled with water.
– Do not use the unit in humid locations or
bad weather, such as in the rain or snow.
– Do not get the unit wet.
If you touch the unit with wet hands, or
put the unit in a damp article of clothing,
the unit may get wet and this may cause
a malfunction of the unit.
• If you experience discomfort after using
the unit, stop using the unit immediately.
• The earpads may deteriorate due to
longterm storage or use.
• If you have any questions or problems
concerning this unit that are not covered in
this manual, please consult your nearest
Sony dealer.
Optional replacement earpads can be
ordered from your nearest Sony dealer.
Location of the serial number label
(Fig. ).
http://www.sony.net/
Compatible 繁體中⽂
iPhone/iPod
請勿將本系統安放在書櫥或壁櫥等狹窄封閉
處。
models
請勿將電池（安裝的電池組或電池）⾧時間
You can use the unit with only the following
暴露在如陽光或⽕源等類似過熱的地⽅。
models. Update your iPhone or iPod to the
latest software before use.
經型式認證合格之低功率射頻電機，⾮經許
• iPhone 7
可，公司、商號或使⽤者均不得擅⾃變更頻
• iPhone 7 Plus
率、加⼤功率或變更原設計之特性及功能。
• iPhone SE
• iPhone 6s
低功率射頻電機之使⽤不得影響⾶航安全及
• iPhone 6s Plus
⼲擾合法通信；經發現有⼲擾現象時，應⽴
• iPhone 6
即停⽤，並改善⾄無⼲擾時⽅得繼續使⽤。
• iPhone 6 Plus
前項合法通信，指依電信法規定作業之無線
• iPhone 5s
電通信。低功率射頻電機須忍受合法通信或
• iPhone 5c
⼯業、科學及醫療⽤電波輻射性電機設備之
• iPhone 5
⼲擾。
• iPod touch (6th generation)
(As of August 2017)

Specifications

General
Communication system: BLUETOOTH
LDAC™的名稱與標識為Sony Corporation的商
Specification version 4.1
標。
Output: BLUETOOTH Specification Power
Bluetooth®字樣與商標為Bluetooth SIG, Inc.
Class 2
所擁有的註冊商標；Sony Corporation針對此
Maximum communication range: Line of
類標⽰的使⽤已獲得授權。
sight approx. 10 m 1)
Frequency band: 2.4 GHz band (2.4000 GHz
N字標⽰為NFC Forum, Inc.在美國和其他國家
- 2.4835 GHz)
的商標或註冊商標。
Compatible BLUETOOTH profiles 2) :
A2DP (Advanced Audio Distribution Windows是Microsoft Corporation在美國和/或
Profile) 其他國家的註冊商標或商標。
AVRCP (Audio Video Remote Control
Apple、iPhone、iPod、iPod touch、macOS和
Profile)
Mac是Apple Inc.（蘋果電腦公司）在美國以及
HFP (Hands-free Profile)
其它國家註冊的商標。
HSP (Headset Profile)
Supported Codec : SBC , AAC , LDAC, aptX,
3) 4) 5) "Made for Apple"徽章的使⽤，是指某配件
aptX HD
可以與特定的標有該徽章的Apple產品連接，並
Supported content protection method:
經開發者證明符合Apple性能標準。Apple並不
SCMS-T
對該裝置的操作或其安全和規章標準的遵⾏提
Transmission range (A2DP):
供保證。
20 Hz - 20,000 Hz (Sampling frequency
Qualcomm®是Qualcomm Incorporated在美國與
44.1 kHz)
其他國家註冊的商標，並獲得許可使⽤。
20 Hz - 40,000 Hz (Sampling frequency
Qualcomm aptX™ audio是Qualcomm
LDAC 96 kHz, 990 kbps)
Technologies International, Ltd.在美國與
Included items:
其他國家註冊的商標，並獲得許可使⽤。
Wireless stereo headset (1)
Micro-USB cable (approx. 50 cm) (1)
Android為Google LLC.的商標。
Headphone cable (approx. 1.2 m) (1)
其他商標和商標名稱為其各⾃所有⼈擁有。
Carrying pouch (1)
Reference Guide (this sheet) (1)
Operating Instructions (1)
預防措施
The actual range will vary depending on
1)
factors such as obstacles between devices,
關於BLUETOOTH通訊
magnetic fields around a microwave oven,
static electricity, reception sensitivity, • BLUETOOTH無線技術可在約10 m的範圍內運
antenna's performance, operating system,
作。最⼤通訊範圍可能依障礙物（⼈體、⾦
software application, etc.
屬、牆⾯等）或電磁環境不同⽽定。
BLUETOOTH standard profiles indicate the
2) • 天線內建在裝置中，如圖中虛線所⽰
purpose of BLUETOOTH communications
（圖）。將內建天線朝連接的BLUETOOTH裝
between devices.
置⽅向轉動可以增加BLUETOOTH通訊的敏感
3) Codec: Audio signal compression and
度。若連接裝置的天線與本機內建天線之間
conversion format
有障礙物，可能會出現雜訊或⾳訊中斷的情
Subband Codec
4)
況，也可能無法使⽤通訊功能。
Advanced Audio Coding
5)
• 在以下情況中，BLUETOOTH通訊可能無法使
⽤，或者會出現雜訊或⾳訊中斷的情況。
Wireless stereo headset
– 本機與BLUETOOTH裝置之間有⼈體阻隔。
Power source:
DC 3.7 V: Built-in lithium-ion
– 本機和BLUETOOTH裝置間有⾦屬或牆⾯等障
rechargeable battery
DC 5 V: When charged using USB
– Wi-Fi裝置、無線電話，或微波爐等
Mass: Approx. 180 g
Operating temperature: 0 °C to 40 °C
• 由於BLUETOOTH裝置和Wi-Fi（IEEE802.11b/
Rated power consumption: 1.2 W
g/n）使⽤相同頻率（2.4 GHz），若本機在
Usage hours:
Wi-Fi裝置附近使⽤，可能會發⽣微波⼲擾⽽
When connecting via the BLUETOOTH
導致雜訊、⾳訊中斷或是通訊功能無法使⽤
device
等情況。在此情況下，請執⾏以下步驟。
Music playback time: Max. 24 hours
– 請在距離Wi-Fi裝置⾄少10 m的地⽅使⽤本
Communication time: Max. 20 hours
Standby time: Max. 250 hours
– 若要在距離Wi-Fi裝置10 m內的地⽅使⽤本
Note: Usage hours may be shorter
depending on the Codec and the
– 將本機和BLUETOOTH裝置安裝在盡量靠近彼
conditions of use.
Charging time:
• 從BLUETOOTH裝置放射出的微波可能會影響電
Approx. 4 hours
⼦醫療裝置的操作。在以下地點請關閉本機
(About 90 minutes of music playback is
和其他BLUETOOTH裝置，以免造成意外：
possible after 10 minutes charging.)
– 有易燃性⽡斯的地點、醫院或加油站
Note: Charging hours may be different
– 靠近⾃動⾨或⽕警警鈴的地⽅。
depending on the conditions of use.
• 本產品以無線模式使⽤時會發射無線電波。
Charging temperature: 5 °C to 35 °C
在⾶機上以無線模式使⽤時，請遵從機組⼈
Receiver
員關於允許以無線模式使⽤產品的指⽰。
• 由於無線技術的特性，本機上播放的聲⾳延
Type: Closed, Dynamic
遲於發送裝置上播放的聲⾳和⾳樂。因此，
Driver unit: 40 mm
觀看電影或玩遊戲時，影像和聲⾳可能不同
Frequency response: 5 Hz - 40,000 Hz
步。
(JEITA)
• 本機⽀援符合BLUETOOTH標準的安全性能，以
Impedance:
便在使⽤BLUETOOTH無線技術時提供安全的連
18 Ω (1 kHz) (when connecting via the
接，但依設定不同⽽定，安全性可能會不
headphone cable)
⾜。使⽤BLUETOOTH無線技術進⾏通訊時，請
Sensitivity:
務必⼩⼼。
98 dB/mW (when connecting via the
• 對於BLUETOOTH通訊期間的資訊外洩，本公司
headphone cable)
不負有任何責任。
Microphone
• 不保證與所有BLUETOOTH裝置均能連接。
Type: Electret condenser – 有BLUETOOTH功能的裝置必須符合由
Directivity: Omni directional
Effective frequency range: 50 Hz - 8,000 Hz
– 即使連接的裝置符合上述BLUETOOTH標準，
System requirements for
battery charge using
– 使⽤⼿機的免持聽筒通話時，依裝置或通
USB
• 依要連接的裝置不同⽽定，可能需要⼀些時
(As of August 2017) 間才能開始通訊。
Personal Computer with pre-installed with
如果播放時經常跳⾳
any of the following operating systems and
• 將⾳質模式設定為"穩定連線優先"可改善
USB port:
此情況。詳細資訊，請參閱說明指南。
Operating Systems • 在傳輸裝置上變更無線播放品質設定或是將
(when using Windows) 無線播放模式固定為SBC，可以改善此情況。
® ®
Windows 10 Home / Windows 10 Pro
詳細資訊，請參閱傳輸裝置提供的使⽤說明
® ®
Windows 8.1 / Windows 8.1 Pro 書。
® ®
Windows 8 / Windows 8 Pro • 如果正在使⽤智慧型⼿機，或許可以透過關
®
Windows 7 閉不需要的應⽤程式或重新啟動智慧型⼿機
Home Basic / Home Premium /
來改善狀況。
Professional / Ultimate
關於使⽤智慧型⼿機和電腦的通話應⽤程式
• 本機僅⽀援⼀般來電。不⽀援智慧型⼿機和
(when using Mac)
電腦的通話應⽤程式。
macOS (version 10.9 or later)
關於為本機充電
Design and specifications are subject to
• 僅可使⽤USB為本機充電。需要帶有USB連接
change without notice.
埠的個⼈電腦才能充電。
• 充電期間內本機無法開機，也無法使⽤
BLUETOOTH功能。
• 對本機充電時，仍可透過連接隨附的⽿機連
接線使⽤本機。
• 若您⾧時間未使⽤本機，充電電池可能無法
維持⾜夠電量。電池要重複放電及充電數次
後，才能適當地維持電量。
• 若您要⾧時間存放本機，請每半年讓電池充
電⼀次，避免過度放電。
• 若本機可供使⽤時間變得⾮常短，就應該更
換新的充電電池。請聯絡附近的Sony經銷商
更換電池。
靜電注意事項
• 體內所累積靜電可能會對您的⽿朵造成輕微
刺痛。若要將此影響降⾄最低，請穿著天然
材質製造的⾐物。
本機無法正常運作時
• 請重設本機（圖）。
充電時同時按下和按鈕。本機將會重設。
配對資訊不會被刪除。
• 若經過以上重設操作後問題仍然存在，請按
下列步驟初始化本機。
斷開micro-USB連接線與micro-USB連接埠的
連接，關閉本機，然後同時按住和按鈕
超過7秒。指⽰燈（藍⾊）將閃爍四次，此時
本機將重設回出廠設定。所有配對資訊皆被
刪除。
• 本機初始化後，可能無法連線⾄iPhone或電
腦。在這種情況下，請由iPhone或電腦刪除
本機配對資訊，然後再次配對。
其他
• 折疊時⼩⼼不要讓⼿指夾⼊本機。
• 當您將本機當做有線⽿機使⽤時，只能使⽤
隨附⽿機連接線。務必將⽿機連接線牢牢插
⼊。
• 請勿將本機放置在暴露於濕氣、灰塵、油煙
腦。在這種情況下，請由iPhone或電腦刪除
本機配對資訊，然後再次配對。
其他
• 折疊時⼩⼼不要讓⼿指夾⼊本機。
• 當您將本機當做有線⽿機使⽤時，只能使⽤
隨附⽿機連接線。務必將⽿機連接線牢牢插
⼊。
• 請勿將本機放置在暴露於濕氣、灰塵、油煙
或蒸汽，或是受陽光直射的地⽅。請勿⾧時
間將本機留在⾞內。這樣可能會引起故障。
• 依無線電波情況和裝備正在使⽤的地點不同
⽽定，BLUETOOTH裝置可能無法在⼿機上作
⽤。
• ⾼⾳量可能會影響您的聽⼒。
• 為了交通安全，切勿在駕⾞或騎⾞時使⽤⽿
機。
• 在無法聽到周圍聲⾳會造成危險的環境，如
鐵路平交道、⽕⾞站⽉台、⼯地等，請勿使
⽤⽿機。
• 請勿將重物放置在本機上或施加壓⼒，因為
⾧時間存放時可能會造成本機變形。
• 請勿讓本機受到嚴重撞擊。
• 請使⽤柔軟的乾布清潔本機。
• 請勿將本機放在⽔中。本機不防⽔。
務必遵守以下注意事項。
– 請⼩⼼不要讓本機跌落洗滌槽或其他裝滿
⽔的容器裡。
– 切勿在潮濕的場所或在天氣不良的情況下
使⽤本機，例如：下⾬或下雪。
– 切勿弄濕本機。
如果⽤潮濕的⼿觸碰本機，或將本機放在
潮濕的⾐物內，則可能會弄濕本機，並可
能造成本機故障。
• 若您在使⽤本機後感到不適，請⽴即停⽌使
⽤本機。
• ⽿墊可能會因為⾧期存放或使⽤⽽損壞。
• 若您有任何關於本機的疑問或問題未在本說
明書中涉及，請聯絡附近的Sony經銷商。
可向附近的Sony經銷商訂購選購的替換⽤⽿
墊。
序號標籤的位置（圖
相容iPhone/iPod機型
您只能搭配以下機型使⽤本機。使⽤前，將
iPhone或iPod更新⾄最新軟體。
• iPhone 7
• iPhone 7 Plus
• iPhone SE
• iPhone 6s
• iPhone 6s Plus
• iPhone 6
• iPhone 6 Plus
• iPhone 5s
• iPhone 5c
• iPhone 5
• iPod touch（第6代）
（截⽌⾄2017年8⽉）
規格
⼀般資訊
通訊系統：BLUETOOTH規格版本4.1
輸出：BLUETOOTH規格Power Class 2
最⼤通訊範圍：直視距離約10 m內
頻段：2.4 GHz波段（2.4000 GHz -
2.4835 GHz）
相容的BLUETOOTH模式
A2DP（Advanced Audio Distribution
Profile）
AVRCP（Audio Video Remote Control
將BLUETOOTH裝置⾯對本機天線放置即可改 Profile）
善此情況。 HFP（Hands-free Profile）
HSP（Headset Profile）
礙物。 ⽀援的Codec 3) ：SBC
aptX HD
2.4 GHz頻率的裝置正在本機附近使⽤。 ⽀援的內容保護法：SCMS-T
傳輸範圍（A2DP）：
20 Hz - 20000 Hz（採樣頻率44.1 kHz）
20 Hz - 40000 Hz（採樣頻率LDAC
96 kHz，990 kbps）
隨附物品：
無線⽴體聲⽿機（1）
機。 Micro-USB連接線（約50 cm）（1）
⽿機連接線（約1.2 m）（1）
機，請關閉Wi-Fi裝置。 攜⾏袋 (1)
參考指南（本⾴）（1）
此的地⽅。 使⽤說明書（1）
實際範圍將會依裝置間的障礙物、微波爐周
1)
圍的磁場、靜電、接收敏感度、天線效能、
操作系統、軟體應⽤程式等因素⽽有所不
同。
2) BLUETOOTH標準檔案說明裝置間BLUETOOTH通
訊的⽬的。
3) Codec：⾳訊壓縮和轉換格式
4) ⼦頻帶Codec
5) 進階⾳訊編碼
無線⽴體聲⽿機
電源：
DC 3.7 V：內建鋰離⼦充電電池
DC 5 V：使⽤USB充電時
質量：約180 g
操作溫度：0 ℃⾄40 ℃
額定功耗：1.2 W
使⽤時數：
當經由BLUETOOTH裝置連線使⽤時
⾳樂播放時間：最⾧24⼩時
Bluetooth SIG, Inc.指定的BLUETOOTH標 通訊時間：最⾧20⼩時
準並取得認證。
待機時間：最⾧250⼩時
注意事項：使⽤時數可能會較短，視
依裝置功能或規格不同⽽定，部分裝置仍 Codec和使⽤情況⽽定。
可能無法正確連接或運作。 充電時間：
約4⼩時
訊環境不同⽽定，可能會產⽣雜訊。
（充電10分鐘後可播放⾳樂約90分鐘。）
注意事項：充電時數可能視使⽤情況⽽有
所不同。
充電溫度：5 ℃⾄35 ℃
接收器
型式：封閉式，動態
激勵單元：40 mm
頻率響應：5 Hz - 40000 Hz（JEITA）
阻抗：
18 Ω（1 kHz）（透過⽿機連接線連接
時）
靈敏度：
98 dB/mW（透過⽿機連接線連接時）
⿆克⾵
型式：駐極體電容式
指向性：全指向
有效頻率範圍：
50 Hz - 8000 Hz
使⽤USB為電池充電的系統
要求
（截⽌⾄2017年8⽉）
預先安裝以下作業系統和USB埠的個⼈電腦：
作業系統
（使⽤Windows時）
®
Windows 10 Home / Windows
®
Windows 8.1 / Windows
®
Windows 8 / Windows
®
Windows 7
Home Basic / Home Premium /
Professional / Ultimate
（使⽤Mac時）
macOS（10.9或更新的版本）
設計和規格若有變更，恕不另⾏通知。

）。
1)
2) :
4) 、AAC 5) 、LDAC、aptX、
®
10 Pro
®
8.1 Pro
®
8 Pro