Auto Repeat Play; Using The Tape Counter; Interval Repeat Play - Samsung SV-2303X Instruction Manual

Auto Repeat Play

You can set repeat play to repeat the tape continuously from
beginning to end.
1
Press MENU on the remote control.
Result:
PROG OPTIONS INSTALL
2
Press the corresponding
BONUS
CLOCK BONUS LANG
ZUSATZFUNKTIONEN
ZUSATZFUNKTIONEN
3
Press the OK button to select this option.
➛❿!! Result:
$ ❷!! OK BEENDEN: MENU
4 Press the corresponding
in front of the
BONUS
5 To...
AUTO-AUS :AUS
❿ WIEDERHOLEN :AUS
BER. WIEDERHOLEN : 5
Repeat play
Do not wish to repeat play
❿
BEENDEN: MENU 6
$ ❷ On completion, press MENU twice to exit the menu.

Interval Repeat Play

You can set interval repeat play to repeat the cassette several times
for special interval.
1
Press MENU on the remote control.
Result:
2
Press the corresponding
ZUSATZFUNKTIONEN
PROG OPTIONS INSTALL
3
Press the OK button to select this option.
BONUS
CLOCK BONUS LANG
Result:
ZUSATZFUNKTIONEN
4 Press the corresponding
in front of the
➛❿!!
OK BEENDEN: MENU
$ ❷!!
5
To...
Interval repeat play
BONUS
AUTO-AUS :AUS
WIEDERHOLEN :AUS
❿ BER. WIEDERHOLEN : 5
Cancel interval repeat play
6
On completion, press MENU twice to exit the menu.
7
To select interval during playback, press the INPUT/REPEAT
❿ BEENDEN: MENU
$ ❷
button at the desired start point.
Result:
Press the INPUT/REPEAT button one more time at the desired
end point.
Result:
36
The programming menu is displayed.
or ➛, ❿ buttons to select the
,
$ ❷
option.
The ZUSATZFUNKTIONEN menu is displayed.
or buttons, until the cursor is placed
$ ❷
WIEDERHOLEN option.
Press ➛ or ❿, until...
EIN is displayed.
is displayed.
AUS
The programming menu is displayed.
or ➛, ❿ buttons to select the
,
$ ❷
option.
The ZUSATZFUNKTIONENN menu is displayed.
or buttons, until the cursor is placed
$ ❷
BER. WIEDERHOLEN option.
Press ❿, until...
5, 10, 15 is displayed.
(choose repeat time 5 times,
10 times, 15 times)
AUS is displayed.
" INTERVAL REPEAT SETTING " is displayed.
The tape is automatically rewound to the start point.
" INTERVAL REPEAT " is displayed.

Using the Tape Counter

The tape counter:
Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
Is reset when a cassette is inserted in the VCR
Allows you to find the beginning of a sequence easily
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1
Insert a cassette in your VCR.
2
To set the tape counter to zero at the beginning of a sequence:
Press DISPLAY twice to display the counter
Press CLR/RST when you want to set the tape counter to
zero
3
To fast-forward or rewind to the sequence at which the counter
➛ ➛ ❿ ❿
was set to zero, simply press or .
Result: The VCR stops automatically when the counter
reaches zero.
Some VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 16).
Press DISPLAY:
Once to display the current function, programme
number, recording speed (SV-6333X/SV-6332X only),
date, time and counter
Twice to display the counter only
Three times to display the time remaining on the
cassette
Four times to clear the display
GB
0:00:00
SHUTTLE
IPC
V-LOCK
DISPLAY
RST F.ADV
2
TRK PROG
PUT INDEX
V-LOCK
DISPLAY
CLR/RST F.ADV
2
TRK PROG
INPUT INDEX
REPEAT
37