Selecting The Cassette Type - Samsung SV-2303X Instruction Manual

Setting the AV2 Connection (SV-6333X/SV-2333X Only)
If you wish to use the AV2 socket for a PAY TV DECODER, you
must change AV2 to the required position.
PROG OPTIONS INSTALL INSTALL
1
Press MENU on the remote control.
Result:
CLOCK BONUS LANG
SETUP
2
Press the corresponding
SETUP
➛❿!! OK BEENDEN: MENU
" ❷!!
3
Press the OK button to select this option.
Result:
(SV-6333X)
4
Press the corresponding
placed in front of the
INSTALL
AUTO-SENDERPROG.
MAN. SENDEREINST.
5 When...
TV-SYSTEM :G
HF-AUSGANG :CH36
Another VCR or satellite
❿ AV2 :DEC.
receiver is connected to
the AV2(DECODER/EXT.) socket
❿
BEENDEN: MENU
" ❷
The decoder is connected to
the AV2(DECODER/EXT.) socket
(SV-2333X)
6 On completion, press MENU twice to exit the menu.
INSTALL
AUTO-SENDERPROG.
MAN. SENDEREINST.
HF-AUSGANG :CH36
❿ AV2 :DEC.
❿
BEENDEN: MENU
" ❷
Switching between the TV and VCR Modes (SV-6333X/SV-2333X Only)
The TV/VCR button allows you to record one channel with the VCR
while you watch another channel on the TV.
REPEAT
When the VCR indicator is...
On
Off (or the VCR is turned off)
OK
To switch the VCR indicator on and off, simply press the TV/VCR button.
22
The programming menu is displayed.
or ➛, ❿ buttons to select the
,
" ❷!
option.
The SETUP menu is displayed.
or buttons, until the cursor is
" ❷
AV2 option.
Press ➛ or ❿, until...
EING. is displayed.
is displayed.
DEC.
Your television...
The television receives the picture from
the VCR and you can select channels
with the PROG (" or ❷) buttons on the
VCR or the remote control.
The television receives the picture from
your home aerial or cable television
system as it did before you connected
the VCR.
You can then use the programme (" or
❷) buttons on your television to select
the channels.

Selecting the Cassette Type

If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2 or ➛, ❿ buttons to select the
Press the corresponding ,
" ❷!
EINSTELLUNGEN option.
3
Press the OK button to select this option.
4 Press the corresponding or buttons, until the cursor is
" ❷
placed in front of the KASS.WÄHLEN option.
5 Press the ➛ or ❿ buttons as many times as required, until the
correct cassette length is displayed.
E180 E240
E 300 E260
6 Press MENU twice to exit the menu.
Selecting the Recording Speed (SV-6333X/SV-6332X Only)
You can record a cassette at two different speeds:
SP (Standard Play)
LP (Long Play)
In Long Play modes:
Each cassette lasts twice as long
The recording is of a slightly lower quality
To record a cassette... Press the SPEED button on the
remote control, until...
In standard play mode SP is displayed.
In long play mode LP is displayed.
GB
(SV-6333X/SV-2333X)
OPTIONS
OSD :EIN
❿ KASS. WÄHLEN :E180
FARBSYSTEM :AUTO
IPC :EIN
16:9 :AUTO
❿
BEENDEN: MENU
" ❷
(SV-6332X/SV-2303X)
OPTIONS
OSD :EIN
❿
KASS. WÄHLEN :E180
FARBSYSTEM :AUTO
IPC :EIN
❿ BEENDEN: MENU
" ❷
Type Recording Time (in SP)
E-180 180 mins. or 3 hours
E-240 240 mins. or 4 hours
E-260 260 mins. or
4 hours and 20 mins.
E-300 300 mins. or 5 hours
OK
23