Selecting The Colour Mode - Samsung SV-2303X Instruction Manual

FORMAT 16:9 (WIDE SCREEN) (SV-6333X/SV-2333X Only)
Your VCR can automatically read a 16:9 signal from the AV2 input
or a prerecorded 16:9 tape. It can broadcast a 16:9 signal through
a 21 pin scart cable.
1 Press MENU on the remote control.
Result:
2
Press the corresponding
OPTIONS
OSD :EIN
EINSTELLUNGEN
KASS. WÄHLEN :E180
FARBSYSTEM :AUTO
3 Press the OK button to select this option.
IPC :EIN
❿
16:9 :AUTO
Result:
4
Press the corresponding
❿ BEENDEN: MENU
# ❷
placed in front of the
5 Press the ❿ button to select
AUTO Set when you use a wide TV. The VCR detects wide TV
EIN
AUS
6 On completion, press MENU twice to exit the menu.

Selecting the Colour Mode

Before recording or playing back a cassette, you can select the
required system standard.
(SV-6333X/SV-2333X)
Otherwise, the system automatically selects the reception standard
when you select AUTO.
When playing back a cassette, the standard is
OPTIONS
automatically selected by the VCR.
OSD :EIN
KASS. WÄHLEN :E180
When you playback an NTSC-recorded tape on this VCR
❿ FARBSYSTEM :AUTO
make a setting on the colour system according to your TV.
IPC :EIN
16:9 :AUTO If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
❿ BEENDEN: MENU
# ❷
1
Press MENU on the remote control.
(SV-6332X/SV-2303X) Result:
2
Press the corresponding
EINSTELLUNGEN
OPTIONS
OSD :EIN
3
Press the OK button to select this option.
KASS. WÄHLEN :E180
Result:
❿ FARBSYSTEM :AUTO
IPC :EIN
4
Press the corresponding
placed in front of the
5 Press the ❿ button to select
❿ BEENDEN: MENU
# ❷
AUTO When playing back a cassette, the system standard is
B/W
6
On completion, press MENU twice to exit the menu.
32
The programming menu is displayed.
or ➛, ❿ buttons to select the
,
# ❷!
option.
The EINSTELLUNGEN menu is displayed.
or buttons, until the cursor is
# ❷
16:9 option.
AUTO EIN AUS .
programmes and normal TV programmes automatically
when playing back and recording.
The VCR always plays back and records in the mode
compatible with 16:9 wide screen. Set if the VCR cannot
detect wide TV programmes with "AUTO" set.
Set if you do not use a wide TV.
The programming menu is displayed.
or ➛, ❿ buttons to select the
,
# ❷!
option.
The EINSTELLUNGEN menu is displayed.
or buttons, until the cursor is
# ❷
FARBSYSTEM option.
AUTO PAL MESECAM B/W .
automatically selected by the VCR.
Black and White
Selecting the Audio Output Mode (SV-6333X/SV-6332X)
You can select the mode in which the sound is reproduced on the
loudspeakers and AV outputs. The following options are available.
Option Description
L Used to listen to the sound on the left Hi-Fi channel.
R Used to listen to the sound on the right Hi-Fi channel.
MIX Used to listen to the mixed sound of the Hi-Fi and normal
channels.
MONO Used to listen to the sound on the normal mono channel.
L R Used to listen to Hi-Fi stereo sound on the left and right
channels.
When playing back tapes recorded in Hi-Fi, the
sound switches to Hi-Fi after five seconds of Mono.
To select the sound mode, simply press the AUDIO button on the remote
control until the required option is displayed.
Selecting the Audio Mute Mode (SV-2333X/SV-2303X)
You can select the mode in which the sound is mute.
To select the audio mute mode on and off, simply press the AUDIO button
on the remote control.
GB
PEAT
L R MIX
L R MONO
PEAT
X
33