Configurations - WEG ENC-02 Installation, Configuration & Operating Manual

2. ConFiGURaTions

Table 1: Module ENC-01 and ENC-02 configuration switches
Switches Function
External source voltage for
S1:1 the encoder repeater circuit
(ENC-01-only)
S1:2 Not connected internally
Failure detection on signals
S2:1
Z, Z (F079)
Failure detection on
S2:2 encoder signals A, A, B, B,
Z, Z (F079)
S3:1 Encoder voltage supply
S3:2 Not connected internally
(*) Factory standard.
S1:1 and
Figure 4 : Characteristics and signals of cables and connectors
Position
ON
OFF
-
ON
OFF
ON
OFF
ON
OFF
-
S1:2
Operation
5V (By-pass internal
voltage regulator)
7V to 24V (internal vol-
(*)
tage regulator active)
-
Failure detection
(*)
enable
Failure detection
disabled
Failure detection
disabled
Failure detection
(*)
enable
5Vdc
12Vdc
(*)
-
S2:1 and
S2:2
Observations
-
-
-
-
Turn OFF when
the encoder does
not have signals Z
and Z
Does not depend
on the S2:1 status
-
Set according to
the voltage of the
encoder used
-
S3:1 and
S3:2
3