Table of Contents
Advertisement
Available languages
Available languages
installation, Configuration and operation Guide
Expansion BoaRD EnC-01/EnC-02
l. saFETY insTRUCTions
All the safety procedures described in the CFW11 Inverter Manual must be
followed.
ll. GEnERaL inFoRMaTion
This guide gives instructions for installing, configuration and operation of the
optional ENC-01 and ENC-02 modules. These modules are targeted to the reading
of the CFW11 encoder signals.
The ENC-01 module has an additional output for repeating the encoder sig-
nals.
lll. paCKaGE ConTEnTs
- Accessory module in anti-static package.
- Installation, configuration and operation guide.
- Grounding screw.
1. MoDULE CFW11-EnC-01/ CFW11-EnC-02 insTaLLaTion
The optional board modules are installed directly into slots on the CFW11 control
module.
Figure 1: Identification of slots of the optional modules
- slot 1: white
- slot 2: yellow
- slot 3: green
1
Advertisement
Table of Contents
