Use your TV
This section helps you perform basic TV
operations.
Switch TV on or off
Plug in the power plug.
If the standby indicator is lights up, press
(Standby-On) on the remote control,
Press
(Standby-On) on the remote
control.
The TV will switch into standby status.
Though your TV consumes very little power when in
standby mode, energy continues to be consumed. When
not in use for an extended per iod of time, disconnect the
TV power cable from the power outlet.
Switch on the device before selecting it as an external
signal source.
1
Press SOURCES key.
The source list appears.
2
Press ▲/▼ key to select a device.
3
Press OK key to select.
The TV switches to the selected device.
Switch channels
Press CH+/- key on the TV or Channel
●
Control +/- key on the remote control.