Contents 1 Get Support 13 Specifications 1.1 Identify and Register your TV 13.1 Power (For 4022, 4032, 4132 Series) 1.2 TV Help and User Manual 13.2 Power (For 4232 Series) 1.3 On-line Help and User Manual 13.3 Reception 1.4 Consumer Care / Repair 13.4 Display Resolution 13.5 Display Input Resolution 2 Software...
On-line Help and User Manual To solve any Philips TV related problem, you can consult our online support. You can select your language and enter your product model number. Go to www.philips.com/support.
Quick Guide Remote Control Batteries and Cleaning Replace batteries If the TV does not react on a key press on the remote Standby / On control, the batteries might be empty. To switch the TV on or back to Standby. To replace the batteries, open the battery 2.
5. BACK To switch back to the previous channel you selected. IR sensor To close a menu without changing a setting. EXIT The TV can receive commands from a remote control To switch back to watching TV. that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point ...
Page 7
through the list of sources, including the tuner selection. The menu will disappear automatically.
Quick Start Guide that came with the TV. wall mount . . . In case you lost this guide, you can download it from www.philips.com. Use the model number of the TV to look for the Quick Start Guide to download.
Page 9
mm, Maximum 10.5 mm) improper mounting or any mounting that results in - 32Pxx4032 - VESA MIS-F 100x100, M4 (Minimum accident or injury. 10 mm, Maximum 14 mm) Preparation 4132 series TV First remove the 4 plastic screw caps out of the Your TV is also prepared for a VESA-compliant wall threaded bushes on the back of the TV.
- 22PFx4232 - VESA MIS-F 75x75, M4 (Minimum 10 mm, Maximum 10.5 mm) Preparation For 22"/24" First remove the 4 plastic screw caps out of the threaded bushes on the back of the TV. Make sure that the metal screws, to mount the TV to the VESA-compliant bracket, go about 10mm deep inside the threaded bushes of the TV.
Page 11
Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time. Switch On or Standby Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV.
TV settings when you switch to this device in the Sources menu. If you need help to connect several devices to the TV, you can visit the Philips TV connectivity guide. The guide offers information on how to connect and which cables to use.
* Network port is only for xxPxTxxx2/05 series ** Satellite port is only for xxPxSxxx2 series * Network port is only for xxPxTxxx2/05 series Copy protection HDMI cables support HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection signal Video Device that prevents copying content from a DVD disc or Blu- ray Disc.
Page 14
Switch on EasyLink (Home) > Settings > General settings > EasyLink > EasyLink > On Operate HDMI CEC-compatible devices with TV remote control For 22"/24" (Home) > Settings > General settings > EasyLink > EasyLink remote control > On Note: - EasyLink might not work with devices from other brands.
For 22"/24" Audio Device HDMI ARC Only HDMI 1 on the TV have HDMI ARC (Audio Return Channel). If the device, typically a Home Theatre System (HTS), also has the HDMI ARC connection, connect it to HDMI 1 connection on this TV. With the HDMI ARC connection, you do not need to connect the extra audio cable that sends the sound of the TV picture to the HTS.
Computer HDMI - DVI * Network port is only for xxPxTxxx2/05 series If you still own a device that only has a DVI ** Satellite port is only for xxPxSxxx2 series connection, you can connect the device to HDMI 2 connection with a DVI to HDMI adapter. Use a DVI to HDMI adapter if your device only has a VGA (if available) DVI connection.
slot permanently. Ideal Settings When you switch on the TV, it may take a few minutes (Home) > before the CAM is activated. If a CAM is inserted and Settings > Picture > subscription fees are paid (subscription methods can Advanced >...
Warning The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application. This will corrupt your recordings.
searches for the network connection. 6. A message will be shown when the connection is successful. If the connection fails, you can check the DHCP setting of the router. DHCP should be switched on. Network Settings (Home) > Settings > Network > View network settings You can view all current network settings here.
Switch Source Source List - To open the sources menu, press SOURCES - To switch to a connected device, select the device with the arrows (up) or (down) and press OK. - To close the Source menu without switching to a device, press ...
installlation > Search for channels > Update channels Channels Re-install all channels (Home) > Settings > Antenna/cable About Channels and Switch installlation > Search for channels > Re-install Channels channels 1. Select the country where you are now and To watch TV channels press OK.
Page 22
Symbol rate mode frequency, position the arrows on a number with and and change the number If your cable provider did not give you a with and . To check the frequency, specific symbol rate value to install the TV channels, leave the Symbol rate mode setting on Automatic.
Page 23
installation. This will speed up the installation. Satellite (if available) • Unicable - You can use a Unicable system to connect the antenna dish to the TV. You can select About Installing Satellites Unicable for 1 or for 2 satellites at the start of the installation.
Page 24
new channels. Satellite Channel List - Polarisation - Select the polarisation you need. (Home) > Settings > Satellite installlation > - Symbol rate mode - Select Manual to enter symbol Satellite channel list rate. You can select your preferred satellite channel list - Frequency - Enter the frequency for the when press ...
With Channel list copy, you can copy the channels 1. Plug in the power plug to start the installation and installed on one TV onto another Philips TV of the select language and country. You can skip the same range. With Channel list copy, you avoid the channel search.
1. While watching a channel, press OPTIONS. press (right). 2. Press OPTIONS again to close. 3. Select Mono or Stereo and press OK. 4. Press (left) repeatedly if necessary, to close the menu. Subtitles To switch on Subtitles, press SUBTITLE. Status You can switch Select Status to view technical information on the...
7. Select Done when complete the editing. Search Channels 8. Press LIST again to close the channel list. LIST > OPTIONS > Search channel You can search for a channel to find it in a long list of Select Channel Filter channels.
- T.O.P. overview Reorder Channels To open T.O.P. Text. - Enlarge You can reorder, reposition channels in the Favourite To enlarge the Text page for comfortable reading. channel list. - Reveal 1. While watching a TV channel, press LIST > OPTIONS > Select channel To unhide hidden information on a page.
Change Day TV Guide If the TV guide information comes from the broadcaster, you can press + to view the schedule of one of the next days. Press - to go back to the previous day. What You Need Alternatively, you can press ...
Page 30
Set a Recording You can set a recording in the TV Guide. In the TV Guide, a programme set to be recorded is marked with . To see the recording list, press Recordings , a programme set to be recorded is marked with ...
The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another Recording and TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application. This will Pause TV corrupt your recordings.
Schedule a Recording Pause TV You can schedule a recording of an upcoming programme for today or a few days from today What You Need (maximum of 8 days away). The TV will use the data from the TV Guide to start and end the recording. You can pause a digital TV broadcast and resume To record a programme…...
Photo Options Videos, Photos and With a photo on screen, press OPTIONS to… Music Start slideshow, Stop slideshow Start or stop slideshow. Slideshow transitions 10.1 Set the transition from one picture to the next. From a USB Connection Slideshow frequency Select the display time for each photo.
folder. Music Options Options for playing music... Video Options Repeat, Play once Play songs repeatedly or once. During the video playback, press OPTIONS to… Subtitles Shuffle on, Shuffle off Display the subtitles if available, select On, Off, Play songs in sequence or at random. or On during mute.
11.3 Quick Settings and All Open TV Setting Settings Menus Quick settings menu: 11.1 Press SETUP key on the remote control to find Home Menu Overview frequently used settings in Quick settings menu. - Picture style: Select one of preset picture styles for Press ...
Page 36
- Movie - Ideal for watching movies Adjust the colour enhancement - Game - Ideal for gaming (Home) > Settings > Picture > Advanced > Colour > Colour enhancement Custom a style Select Maximum, Medium, or Minimum to set the level of the colour intensity and the details in bright You can adjust and stored picture settings in in the colours.
the sound of the TV picture. CAM Operator Profile You can set the value in steps of 5ms. Maximum setting is 60ms. (Home) > Settings > General settings > CAM Operator Profile To switch on operator profile for CI+/CAM for easy channel installation and updates.
Page 40
Redo full TV installation , and set TV status back to Clock the first time you switch on (Home) > Settings > Region and (Home) > Settings > General language > Clock settings > Reinstall TV Enter PIN code and select Yes, the TV will reinstall completely.
or programmes. Universal Access Settings Note: If you forgot your PIN code, you can override (Home) > Settings > Universal access the current code use 8888 and enter a new code. With Universal Access switched on, the TV is prepared for use for the deaf, hard of hearing, blind or Lock for Programme partially sighted people.
- On Mode Power Consumption (W) : 19 W can also find the power consumption values for this - Annual Energy Consumption (kWh) * : 28 kWh product on the Philips website for your country - Standby Power Consumption (W) **: 0.30 W at www.philips.com/TV...
Product specifications are subject to change without - Analogue video playback : SECAM, PAL notice. For more specification details of this product, - Digital video playback : MPEG2 SD/HD (ISO/IEC www.philips.com/support 13818-2), MPEG4 SD/HD (ISO/IEC 14496-10), HEVC* - Digital audio playback (ISO/IEC 13818-3) Power...
Settings > Help > User manual to find Philips startup screen the information you are looking for. When the TV is in standby, a Philips startup screen is If the User manual doen't answer your question, you displayed, then the TV returns to standby mode. This can go to the support website of Philips.
14.4 Picture position is incorrect Channels - Picture signals from some devices may not fit the screen correctly. Check the signal output of the connected device. No digital channels found during the installation Computer picture is not stable See the technical specifications to make sure that your TV supports DVB-T or DVB-C in your country.
behaviour is normal. 14.8 Photos, videos and music from a USB device do not show - Make sure that the USB storage device is set to Mass Storage Class compliant, as described in the storage device's documentation. - Make sure that the USB storage device is compatible with the TV.
TV to the wall or a suitable support. Contact Philips TV Consumer Care to have the TV - Teach children about the dangers of climbing on checked before use.
Errors The condensation moisture will not harm the TV or reported to Philips will be adapted and published on cause malfunction. the Philips support website as soon as possible. Terms of warranty - Risk of injury, damage to TV or void of warranty! 15.2...
Page 52
standards applicable at the time of producing the products. TP Vision is committed to developing, producing and marketing products that cause no adverse health effects. TP Vision confirms that, as long as its products are handled properly for their intended use, they are safe to use according to scientific evidence available today.
16.4 Other Trademarks Copyrights All other registered and unregistered trademarks are 16.1 the property of their respective owners. HDMI The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Source: http://linuxappfinder.com/package/libsqlite Open Source libpng 17.1 Open Source Software libpng is the official PNG reference library. It supports almost all PNG features. This television contains open source software. TP Source: www.libpng.org Vision Europe B.V. hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source OpenSSL (1.0.0.d) software packages used in this product for which such...
Page 55
support for translucent windows and multiple display libexpat layers, not only on top of the Linux Framebuffer Device. Expat is an XML parser library written in C. It is a complete hardware abstraction layer with It is a stream-oriented parser in which an application software fallbacks for every graphics operation that is registers handlers for things the parser might find in not supported by the underlying hardware.
On-line User Manual 3 CI Card 17 Optical 15 Colour 36 Colour Enhancement 36 Colour Settings 36 Philips Support 3 Colour Temperature 36 Picture Clean 37 Computer Connection 16 Picture Contrast Mode 36 Computer Picture Setting 36 Picture Format 37...
Page 57
Source List 20 Speakers or Headphones 41 Standby Mode 11 Subtitle Language 40 Super Resolution 37 Surround Sound 38 Switching On 11 Teletext 28 Text 28 Text Language 40 Time 40 Time Settings 40 Time Zone 40 Troubleshooting 47 TV placement 8 Universal Access 41 Update Satellite Channels 23 Update Software 4...