Table of Contents
Advertisement
Tuner / Reception /
Transmission
Aerial input: 75ohm coaxial (IEC75)
●
Supported Systems:
●
DTV: DVB-T.
24" : 30W
●
TV
, please purchase a Philips
To mount the
TV
mount or any TV mount compliant with the
VESA standard. To prevent damage to cables
and connectors, be sure to leave a clearance
gap of at least 2.2 inches or 5.5cm between the
back of the TV to the wall.
Please follow all instructions provided with the
mount. TP Vision Europe B.V. bears no responsibility
for improper TV mounting that results in accident,
injury or damage.
24"
100 100
7
This section covers common problems and their
accompanying solutions.
The TV cannot be switched on:
Disconnect the power cable from the
●
power outlet. Wait for one minute before
reconnecting it.
Check that the power cable is securely
●
connected.
The remote control is not working properly:
Check that the remote control batteries
●
are correctly inserted according to the +/-
orientation.
Replace the remote control batteries if
●
they are flat or weak.
Clean the remote control and TV sensor
●
lens.
The TV menu is in the wrong language.
Change the TV menu to your preferred
●
language.
When turning the TV On/Off or to Standby,
TV
you hear a creaking sound from the TV
chassis
No action is required. The creaking sound
●
comes from the normal expansion and
contraction of the TV as it cools down and
warms up. This does not impact its
performance.
TV
Channel issues
Previously installed channels do not appear in
the channel list:
Check that the correct channel list is
●
selected.
EN 14
Hide quick links:
Advertisement
Table of Contents
