Wall Mounting - BellSouth MH9932 Installation Instructions & Owner's Manual

Wall Mounting

Wall Mounting
You may choose to mount the BASE UNIT of your cordless telephone on a wall.
1. With the back of the BASE UNIT facing up, connect the SHORT TELEPHONE
LINE CORD to the telephone line jack.
2. Insert the SHORT TELEPHONE LINE CORD through the hole of the MOUNTING
BRACKET.
3. Insert the hooks of the MOUNTING BRACKET (marked "WALL MOUNT") into the
matching slots of the BASE UNIT (as shown below). Then slide the MOUNTING
BRACKET into place as indicated by the arrow. Plug the free end of the SHORT
TELEPHONE LINE CORD into the MODULAR WALL JACK.
4. Align the upper keyhole on the MOUNTING BRACKET with the upper STUD of
the wall plate, so that the opening end of the MOUNTING BRACKET matches the
lower stud, then pull the BASE UNIT down until securely seated.
MOUNTING
BRACKET
WALL PLATE
STUD
WALL
PLATE
TELEPHONE
LINE JACK
TELEPHONE
LINE CORD
BASE UNIT
18