Program Station Group Names - Samsung OfficeServ 7000 Series System Administration Manual

PROGRAM STATION GROUP NAMES

This program is used to assign a character name or identification for each station
group. You may assign a name 11 characters long.
PROGRAM KEYS
UP & DOWN - Used to scroll and move cursor.
KEYPAD - Used to enter characters.
HOLD - Press to clear entry.
Open customer programming and follow the instructions below.
ACTION
1. Press TRSF and then dial 602
Display shows the first group
2. Dial the group number (e.g., 505) OR
press the UP or DOWN key to make a
selection and press the left or right
soft key to move the cursor
3. Enter the name using the method
in Program Station Names
4. Press the left or right soft key to return to
step 2 OR press TRSF to store and exit
programming OR press SPK to store and
advance to the next program
17
DISPLAY
[501] SGR NAME
[505] SGR NAME
[505] SGR NAME
SAMSUNG