Advertisement
Part 5
PROGRAMMING MODE -
2 2
Factory reset - EEPt
After factory reset, machine information is changed to the default value.
Entering set up mode.
You will see LqC1
Note
• Washing time
• Rinse cycle
• Top spin speed
• Water level is HI(23.7Kh)
2 0
Press the NORMAL 75 or the NORMAL 60
Button until
appears in the display.
Press the START button.
Press the NORMAL 75 button until
display.
Press the START button, then factory reset is done.
is displayed.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Noncoin type – Press MEDICAL 90 button until ready mode
appears in the display.
10 minutes
twice
1,000 RPM
Test Mode
Button
appears in the
Display
Advertisement
