Advertisement
Part 5
PROGRAMMING MODE -
6 6
Top spin speed – final spin time depends on RPM
Entering set up mode.
You will see LqC1
Note
Top spin speed
0: 1000rpm
1: 900 rpm
2: 800 rpm
If you select 800 or below, the final spin time will be reduced by 9minutes
If you select 1000 ,900 rpm , the final spin time is fixed by 13 minutes
Press the MEDICAL 90 button.
Press the NORMAL 75 or the NORMAL 60
button until
appears in the display.
Press the START button.
Press the NORMAL 75 or the NORMAL 60
button until
appears in the display.
Press the START button.
Display previous top spin speed.
Press the NORMAL 75(+) or the NORMAL 60(-) button to
select top spin speed. (0~4)
Press the START button.
The machine sets up the top spin speed, then advances to the
next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Noncoin type – Press MEDICAL 90 button until ready
mode appears in the display.
3: 600 rpm
4: 400 rpm
Setup Mode
Button
Display
1 7
Advertisement
