LG WD-10467BD Owner's Manual page 11

Part 5 PROGRAMMING MODE
I Algorithm flow chart shows how to control programming mode.
I Before program set, check the structure of programming mode.
1. The method of entering set up mode.
1) Push the MEDICAL 90 and NORMAL 60 button at the
same time.
2) Push the NORMAL 75 button 3times.
3) Push the START button.
4) 'LqC1' will show on the display.
is to set price value, time value, and vend type etc.
consists of line test, reset, free cycle, and kill cycle.
Is to collect the usage data (Card type or coin type setup).
I STRUCTURE OF PROGRAMMING MODE
Note
• Do not use
• It is only used in inspecting the machine.
, .
2. Press the MEDICAL 90 button to move to the upper level.
3. Press the NORMAL 75 or the NORMAL 60 button if you want
to be at the same level.
4. Press START button to enter the details of Set up, Diagnostic
Tests.
1 1