Orbit B-hyve User Manual page 11

Programming the Timer–RUN TIME
This is where you will set up how long
each zone will run
Turn the dial until the selection box is on
RUN TIME and press the dial .
The station number will flash–turn the
dial until the desired zone is flashing and
press the dial .
The duration for that zone will flash–turn
the dial until the desired duration is
showing and press the dial .
Repeat this process for each zone you
wish to set up .
If you wish to set-up zones in different
programs, A B or C, press the PROG
ABC button until the program is
showing in the LCD .
20
Note: Programming for each of the features covered
here can be accomplished at the timer or with the app .
Programming the Timer–HOW OFTEN
This will determine HOW OFTEN (what
days or interval) the timer will water .
Turn the dial until the selection box is on
HOW OFTEN and press the dial .
Rotate the dial until the desired day of the
week or Odd/Even or Int is flashing and
press the dial .
If days of the week are chosen, repeat this
process until all of the desired watering
days have a box around them .
If INT (interval) is chosen, rotate the dial
until the desired number of days between
waterings is showing .
If you are setting up additional programs, A
B or C, press the PROG ABC button until
the program is showing in the LCD and
repeat this process .
Note: Programming for each of the features covered
here can be accomplished at the timer or with the app .
21