Listening To A Cassette; Listening To Two Cassettes In Sequence; Rewinding And Fast-Forwarding A Cassette; Recording A Radio Programme - Samsung MAX-900 Instruction Manual

Listening to a Cassette

GB
When you press one of the tape deck's buttons, except for
STOP/EJECT button it remain in the down position. It returns
to its original position automatically when the function is completed
or you cancel the command.
Always treat your cassettes with care; refer, if necessary, to
the section entitled "Precautions When Using Audio
Cassettes" on page 19.
1
Switch the system on by pressing the POWER button.
2
Press the TAPE button.
3
To open either Deck 1 or 2, press the corresponding STOP/EJECT (
button.
4
Insert the pre-recorded cassette with the open edge of the tape facing downwards.
5
Close the deck by pushing on it until it clicks into place.
6
Press the PLAY ( ) button corresponding to the selected deck to
start listening to the cassette.
7
Adjust the volume by pressing the appropriate VOLUME buttons.
8
To stop playback temporarily, press PAUSE ( ).
Press PAUSE ( ) again to continue listening to the cassette.
9
To... Press STOP/EJECT (
Stop playing the cassette Once
Open the cassette door Twice
POWER
1
ON/STANDBY R
DISC SELECTOR
DEMO
1 2 3
2
POP
TAPE
TUNER CD TAPE AUX
BAND
PROGRAM/SET MONO/ST
CLASSIC
TIMER/CLOCK TIMER ON/OFF
PHONES DOWN - - PRESET/MANUAL - - UP
ROCK
HIGH SPEED
DUBBING
6 3,9
8
12
Listening to Two Cassettes in
Sequence
You can only listen to one cassette at a time but you can
switch automatically from one deck to the other to listen to
two cassettes, one after the other.
1
Repeat Steps 1 to 5 above, inserting a cassette in each deck.
2
Press the PLAY ( ) button corresponding to Deck 2.
3
Press the PLAY ( ) and PAUSE ( ) at the same time for Deck 1.
Result: The cassette in Deck 2 is played until the end of the tape is
reached; the cassette in Deck 1 then starts playing automatically.
)
3
3
Rewinding and Fast-Forwarding
)...
a Cassette
You can rewind or fast-forward a cassette.
Example: You wish to listen to a track again or fast-forward
the cassette to the end when you have finished
playing all the tracks on one side of the cassette.
Before fast-forwarding or rewinding the cassette, you must
VOLUME
VOLUME
stop the playback.
7
You can use this function while listening to a compact disc or
DISC
radio programme.
OPE
1
If necessary, press STOP/EJECT ( ) for the appropriate deck to
S.BASS
stop the playback.
2
To...
Fast-forward the cassette
Rewind the cassette
The rewind or fast-forward functions stop automatically when
the beginning or end of the cassette is reached. The REW (
or F/FWD ( ) button then returns to its original position.
2 2 1

Recording a Radio Programme

You can record a radio programme of your choice.
You can only record on cassettes in Deck 1.
You can only record on normal bias cassettes.
You do not need to adjust the volume, as it has no effect on recording.
1
Switch your system on by pressing POWER.
2
Insert a blank cassette in Deck 1.
3
Press the TUNER button to select the radio function.
4
Select the radio station that you wish to record.
5
Press the RECORD (
Result: Recording starts.
6
Press STOP/EJECT (
You can press PAUSE ( ) during recording, if you wish to skip unwanted
passages. Press PAUSE ( ) again when you want to start recording again.
2
1
POWER
ON/STANDBY
R
DEMO

Recording a Compact Disc

You can record a compact disc on a cassette placed in Deck 1.
You can only record on normal bias cassettes.
You do not need to adjust the volume, as it has no effect on recording.
You can start recording with any track on the compact disc.
1
Switch your system on by pressing POWER.
2
Insert a blank cassette in Deck 1.
3
Press the CD button.
Press... 4
Select the required disc.
F/FWD ( )
5
Press the CD button and select the required track on the compact disc.
REW ( )
6
Press the RECORD (
Result:Recording starts.
7
)
Press the PAUSE ( ) button corresponding to Deck 1 to stop recording temporarily.
Result:Recording stops but the compact disc continues playing.
Press PAUSE ( ) a second time to start recording again.
8
When you are ready to stop recording, press STOP/EJECT (
cassette deck and STOP (
If you cannot press the RECORD (
has been inserted correctly and the safety tabs are intact.
1
POWER
ON/STANDBY R
DEMO
PROGRAM/SET MONO/ST

Copying a Cassette (Dubbing)

You can copy a cassette from Deck 2 to Deck 1. Two options
are available:
Normal speed dubbing
High-speed dubbing
Take care not to insert the tape to be copied in Deck 1, as it
will be erased when you start recording.
You do not need to adjust the volume, as it has no effect on
the recording.
1
Switch your system on by pressing POWER.
2
) button corresponding to Deck 1.
Insert a blank cassette in Deck 1.
3
Insert the tape to be copied in Deck 2.
) when you are ready to stop recording.
4
Press the TAPE button to select the cassette function.
5
Press RECORD (
6 Press PLAY (
7
To copy a cassette at high speed, press Hi-DUBBING.
Result: The cassette is copied and the H DUBB indicator flashes.
6
5
8
When you have finished recording, press the STOP/EJECT (
3
buttons for both Deck 1 and Deck 2.
TUNER TUNER CD TA
BAND
It is an infringement of copyright laws to copy records and pre-
recorded cassettes CD or radio programmes or to re-record them in
any form without the permission of the owners of the corresponding
copyright.
The sound quality of cassettes copied using high-speed dubbing
is lower than with normal dubbing.
It is recommended that you turn the volume down during
high-speed dubbing, due to the high-pitched sound.
POWER
ON/STANDBY
DEMO
PHONES
) button corresponding to Deck 1.
) for the
) for the compact disc player.
) button, check that the cassette
6 8 7
3,5
TUNER CD CD TA
BAND
) for Deck 1.
) for Deck 2.
)
1
R
DISC SELECTOR
1 2
3
4
POP
TUNER CD TAPE AUX
TAPE
BAND
PROGRAM/SET MONO/ST
CLASSIC S.BAS
TIMER/CLOCK TIMER ON/OFF
7
DOWN - - PRESET/MANUAL - - UP ROCK
HIGH SPEED
DUBBING
5 8
6
13
GB