Advertisement
This retrofit kit is intended to replace existing 35, 45, and 55 Amp AC to DC power converters (depending on model). Installation
should be completed by a licensed electrician or certified RV Technician. Converter models this kit is intended to replace are as
follows, and instructions for replacement of each model are contained in this manual.
Model PD4635 (35 Amp) for replacement of:
Parallax/Magnetek model 6336
WFCO model 8935
Model PD4645 (45 Amp) for replacement of:
Parallax/Magnetek model 6345
Parallax model 7345
WFCO model 8945
Model PD4655 (55 Amp) for replacement of:
Parallax/Magnetek model 6355
Parallax model 7355
Parallax model 7155
WFCO model 8955
SAFETY FIRST!!!
To insure immediate and continued safety of installation and use of your new Progressive Dynamics Power Converter, please
adhere to the following guidelines for ALL installations:
1.
Do NOT install a converter whose amperage rating is higher than the one originally installed in your application.
Doing so may cause wiring to overheat, resulting in damage to components and/or fire.
2.
Disconnect all power sources prior to removal of the old converter. Power sources may include, but are not limited to:
120VAC shore power (unplug shore power cord)
Onboard generator (disconnect per manufacturer's instructions)
12VDC battery power (disconnect negative terminal(s) from battery(ies))
IMPORTANT! Do not discard any components or fasteners until installation is complete and all aspects of power center pass
testing. Labeling and/or organizing fasteners as they are removed will improve ease of installation, as some fasteners will be re
-used from your current configuration!
INSTALLATION INSTRUCTIONS
PD4600 SERIES CONVERTER REPLACEMENT KIT
Advertisement
