Samsung HW-C900-XAA User Manual page 66

Troubleshooting
Symptom
Can't select Dolby Pro
Logic llx mode.
Can't select NEO:6 mode.
There is no sound when
playing a DTS encoded
DVD.
Product protection function
Heat protection
•
The protection function will come on if the main unit or power transformer overheats.
" " will appear in the display .
This function will come on :
- If speaker terminal is shorted
- If speaker cable is shorted
If there is no problem when you turn the unit on again after turning it off, PROTECTION mark will disappear on the
display and the unit will work properly.
M

If PROTECTION appears on the display, check whether the speaker terminal is shorted and then turn on
the unit again.
ASC Error List
Error No. VFD Message
E01 HP CONCT
E02 NO MIC
E03
NOISY
E04 MIC LEVL
E05 NO FRONT
E07 LEVL OVR
E08 DIST OVR
E13
TIME OVR
E14 CODE ERR
66
Check
• Is the input signal selected properly?
• Is the input signal selected properly?
• Is Digital input selected?
Disconnect the headphones.
Connect the microphone.
Take an appropriate action to reduce the surrounding noise.
The speaker is too close to the microphone.
Check the distance between speaker and microphone.
Check if the front speaker is connected properly.
Check the position of each of speaker and microphone.
The distance between speaker and microphone exceeds the acceptable value.
Check the location of microphone and each speaker.
Unplug the power cable and plug it back.
Then, perform ASC again.
Unplug the power cable and plug it back.
Then, perform ASC again.
Remedy
• Only 2 channel signal can select
Dolby Pro Logic IIx mode. (ex:Dolby
Digital, PCM, 2 channel analog input
signal.)
• Use PCM and Analog input signal.
• Check whether the DVD player is
properly connected and refer to
page 36 to select the digital input.
Action