Emergency Stop Signal System - Mazda CX-5 2018 Owner's Manual

(Without multi-information display)
•
If the AUTOHOLD switch is pressed
without depressing the brake pedal
while the AUTOHOLD is operating
(AUTOHOLD active indicator light is
turned on), the brake pedal operation
demand indicator light (green) in the
instrument cluster turns on to notify the
driver that it is necessary to depress the
brake pedal.
(Green)
(With multi-information display)
If the AUTOHOLD switch is pressed
without depressing the brake pedal
while AUTOHOLD is operating
(AUTOHOLD active indicator light in
instrument cluster is turned on), the
message Brake Pedal Must Be
Depressed to Deactivate Auto Hold
System is indicated on the
multi-information display to notify the
driver to depress the brake pedal.
If any of the following conditions occurs
•
while the AUTOHOLD function is
operating (AUTOHOLD active indicator
light is turned on), the parking brake is
applied automatically and the
AUTOHOLD function turns off. For the
electric parking brake (EPB) operation,
refer to the electric parking brake (EPB)
on page 4-85.
The ignition is switched OFF.
•
There is a problem with the
•
AUTOHOLD function.
NOTE
Flashing
•
When you bring your vehicle to a
complete stop while all the direction
indicator lights are flashing rapidly, the
rapid flashing of all the direction
indicator lights changes back to the
normal flashing pattern. When the
hazard warning light switch is pressed,
all of the direction indicator lights turn
off.
Operation
•
When the ABS operates, the
•
emergency stop signal system is more
likely to operate. Therefore, if the
brake pedal is depressed on a slippery
road, all of the direction indicator
lights may flash.
The emergency stop signal system
•
does not operate when the hazard
warning light switch is pressed.