Chen Hsong Ai-02 Operation Manual page 94

In reserve
AL077
In reserve
AL078
In reserve
AL079
In reserve
AL080
In reserve
AL081
In reserve
AL082
In reserve
AL083
Ejector does not backspace
AL086
MG01 Mould
terminated
MG02 Mould
terminated
MG03 Mould opening distance has not
terminated
MG04 Ejection distance has terminated
MG05 Ejection
terminated
MG06 Plasticizing distance has terminated
MG07 Back lash distance has terminated
MG11 Temperature of the feeding pipe is in
preheating
MG12
Plasticizing is in delay
clamping distance
opening distance
retraction distance
Failure to use
Failure to use
Failure to use
Failure to use
Failure to use
Failure to use
Failure to use
Does not detect the backspacing signal of the
ejector in mould clamping
has Display the finishing of the mould clamping action
in hand operation
has Display the finishing of the mould opening action
in hand operation
Display the non-finishing of the mould opening
distance in hand mould adjustment or ejection
operation
Displaying the finishing of the ejection action in
hand operation
has Display the finishing of the ejection retraction in
hand operation
Display the finishing of the plasticizing action in
hand operation
Display the finishing of the back lash action in
hand operation
Heat preservation function of the feeding pipe is
in activation
Plasticize after terminating the ejection and
reaching the delaying time