Monitor The Cycle - Chen Hsong Ai-02 Operation Manual

"T2"：
Stage 2 temperature setting
"T3"：
Stage 3 temperature setting
"T4"：
Stage 4 temperature setting
"T5"：
Stage 5 temperature setting
"T6"：
Stage 6 temperature setting
"T7"：
Stage 7 temperature setting
Note : T7 can be selected as oil temperature control or barrel
heating control。

Monitor the cycle

5.3
Press twice to call the cycle monitor screen , which shows the entire
action cycle:
Clamping ―→Carriage Forward ―→Injection ―→Pressure Holding
―→Delay......―→Ejector―→ Recycle
The numerical value of each step is the time consumption of this step. The
frame in the middle of the interface shows the cycle time, product number,
cycle number and rejected part number.
(depend on machine model)
(depend on machine model)
(depend on machine model)
(depend on machine model)
Interface of monitoring the cycle (04)
Ai-02 Operation Manual
13