Iee Command Set - Bematech PDX3000 User Manual

8.4 IEE Command Set

1. Capacity <01>
Not available.
2. Display Firmware Version <02>
Display software checksum and software number.
3. Read cursor <03>
Not available.
4. Read data <04>
Not available.
5. Begin blink <06>
Begin blink field at current cursor location.
6. End blink <07>
End blink field at current cursor location.
7. Backspace <08>
Backspace cursor location one position (cursor stays when at home location).
8. Advance cursor <09>
Advance cursor location one position (cursor wraps around after bottom right character
location).
9. Line Feed <0A>
Line feed (vertical scroll from bottom line; cursor position does not change).
10. Clear the display <0C>
Clear the display (cursor stays).
11. Carriage Return <0D>
Return cursor to left-most character position of the same line, but do not clear display.
12. Make cursor invisible <0E>
Make cursor indicator invisible. The cursor location counter continues to function but
there is no visible indicator of next character location.
13. Make cursor visible <0F>
Make cursor indicator visible, flashing block. Default mode.
14. Automatic Carriage Return & Line Feed <10>
Bottom line data entry with automatic carriage return & line feed. Puts cursor at left side
bottom row and data enters beginning at the left-most character. Position of the bottom
row, vertical scroll from bottom line after line has been filled.
42