Epson110-D202 Command Set - Bematech PDX3000 User Manual

8.1.8 Epson110-D202 Command Set

1. Move Cursor Left <08>
Move the cursor one character to the left.
2. Move Cursor Right <09>
Move the cursor one character to the right.
3. Move Cursor Down <0A>
Move the cursor down one line.
4. Move Cursor Up <1F> <0A>
Move the cursor up one line.
5. Move Cursor to home position <0B>
Move the cursor to the left most position on the upper line (home position).
6. Move Cursor to left most position <0D>
Move the cursor to the left most position on the current line.
7. Move Cursor to right most position <1F> <0D>
Move the cursor to the left right most position on the current line.
8. Move Cursor to bottom position <1F> <42>
Move the cursor to the right most position on the lower line (bottom position).
9. Move Cursor to specified position <1F> <24> <n> <m>
Move the cursor to specified position, the n column and the m line.
10. Clear Display Screen <0C>
Clear all of the displayed characters. After the command is executed the cursor moves to
the home position.
11. Clear Cursor Line <18>
Clear the line containing the cursor.
12. Selected peripheral device <1B> <3D> <n>
Select or cancel a peripheral device(s) from the following table in accordance with the
value of n.
n = 1 peripheral device
n = 2 pole display
n = 3 both pole display and peripheral device
13. Initialize Display <1B> <40>
Clear the data in the input buffer and resets the various settings to their initial values.
14. Select / Cancel download Character Set <1B> <25> <n>
Select or cancels the download character set
n = 1 the download character set is selected.
n = 0 the download character set is canceled.
34