Exit; Troubleshooting; Color Dome Camera - Samsung SID-452 Instruction Manual

Camera Operation
MIRROR
- ON : Sets a horizontal image inversion.
- OFF : Cancels the inversion.
MIRROR ON
SHARPNESS: The outline of the video image becomes cleaner and more distinctive
as the level of SHARPNESS increases. If the level goes up excessively,
however, it may affect the video image and generate noise.
•Please press the SETUP button.
•The available range of level is 0 ~ 31.
RESET: Returns to the level which was set by the manufacturer for shipment.
RETURN: Returns to the SETUP menu.

EXIT

Saves all the setting menus and then exits.
34

COLOR DOME CAMERA

MIRROR OFF
User's Manual

Troubleshooting

If you have trouble operating your camera, refer to the following table. If the
guidelines do not enable you to solve the problem, contact an authorized
technician.
Problem
• Please check the power connection.
Nothing appears on
• Please check the video signal line connection.
the screen.
• Please check the Brightness of Auto Iris lens.
• Please check if the lens is clean. Please clean the
The video image is
lens with a clean cloth or brush.
not clear.
• Please adjust the contrast feature of the monitor.
• Please make sure that the screen is not exposed
directly to a bright light. Please move the camera if
necessary.
• Please adjust the contrast feature of the monitor.
The screen is dark.
• If you have an intermediate device, set the 75Ω/
Hi-z properly, and check the terminals. (refer to
page 18)
• Please adjust the brightness level of the Auto Iris
lens.
• If you take the focus of the lens, adjust the focus
lever of the lens.
• Please check if an appropriate power source to the
There is a problem with
camera complies with the manufacturer's standard
the camera operation.
requirement, or if the voltage keeps changing.
The camera surface is
too hot and black
stripes appear on the
screen.
COLOR DOME CAMERA
Solution
35
User's Manual