Master/Slave Mode; Maintenance & Service; Cleaning - Evolite MOVING BEAM 2R MkII User Manual

17
18
19
o Master/ Slave Mode
The "Master" unit is the unit set up in Auto Mode. The Slave unit will be automatically set up as "Slave" if receiving DMX
signal and NOT "Auto Mode" selected .
 Maintenance & service
o Cleaning
The cleaning of internal must be carried out periodically to optimize light output. Cleaning frequency depends on the environment in
which the fixture operates: damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the fixture's
optics.
 Clean with soft cloth using normal glass cleaning fluid.
 Always dry the parts carefully.
 Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days
MOVING BEAM 2R MkII Manual Ver. 1.00
35-39 Dark blue +yellow
40-44 Yellow
45-49 Yellow+CTO
50-54 CTO
55-59 CTO+purple
60-64 Purple
65-69 Purple+green
70-74 Green
75-79 Green+pink
80-89 Pink
85-89 Pink+Orange
90-94 Orange
95-99 Orange+light yellow
100-104 Light yellow
105-109 Light yellow+light green
110-114 Light green
115-119 Light green+CTB
120-124 CTB
125-129 CTB+dark red
130-134 Dark red
135-139 Dark red+white
140-144 White
145-152 Red
153-160 Light Blue
161-168 Dark blue
169-176 Yellow
177-184 CTB
185-192 Purple
193-200 Green
201-208 Pink
209-216 Orange
217-224 Light yellow
225-232 Light green
233-240 CTO
241-248 Dark red
249-255 White
Color wheel Speed
0-255 Color wheel in decreasing speed
Dimmer/Prism Speed
0-255 Dimmer/Prism in decreasing speed
Gobo wheel Speed
0-255 Gobo wheel in decreasing speed
Page 19