Table of Contents
Advertisement
Installation Instructions
Document No. LV5‐6100
Configuration Utility (continued)
3. Use a mini‐USB cable to connect the OCI415.30 to the computer, such as SCC part
number AGA5‐05M. A driver may self‐install the first time a connection is made. The
connected device will then be indicated on the screen.
4. The protocol can be changed between Modbus RTU and BACnet MS/TP from this
screen. See the previous sections for further details on the protocol‐specific settings
that can be changed. Once the desired settings have been entered, click Submit to
apply. Click Reload to refresh the displayed settings.
Page 10
LMV5 Series
SCC Inc.
Advertisement
Table of Contents
