LifeTrak Zoom HRV Quick Start Manual

QUICK START GUIDE

DOWNLOAD APP / STANDBY MODE

®
Install the Zoom HRV App
Please install the FREE Zoom HRV app
(available for iOS and Android)
on your compatible device.
Visit www.zoomhrv.com to learn more
about the app and OS requirements.
STANDBY MODE
- Remove the clear plastic film from the back of your
ZOOM pod.
- Your ZOOM is in Standby Mode & may need a recharge
before initial use. We know you want to use your Zoom
immediately, but you will not be able to PAIR your device
to the app if your battery is too low (< 30%), so please
charge your Zoom now.
For your Zoom to perform at its best, we strongly
recommend that you WEAR YOUR ZOOM 24/7 -
Your Zoom is always tracking data, and the more
you wear it, the more accurate your stats will be.

CHARGING YOUR ZOOM

ALIGN ZOOM POD ON CHARGING DOCK
- There are 3 connector pins on the Charging Dock and
3 connector pads on the backside of your Zoom Pod.
- Align the connectors and place the Zoom Pod on the
Charging Dock. The magnetic connection will hold it in place.

CHECK THE BATTERY STATUS

- To confirm that your Zoom Pod is charging, the RUNNING and
SWIMMING icons will flash in the display.
- Your battery life % will display via flashing LEDs as follows:
Getting Started
15% 30% 45%
70% 85% 99%
GREEN

WEARING YOUR ZOOM

ZOOM POD & YOUR SPORT WRIST BAND
- Always insert the Zoom Pod from the bottom
of the sport wristband or Flexwear band.
55%
- Snap securely in place, making sure the
Zoom Pod is snug in the opening before
wearing.
- To help orient the
Zoom Pod, please note
that the Zoom logo is
printed at the bottom
(six o'clock) position.
100%