Table of Contents
Advertisement
Menu Operation
5. Manual Channel Search
It will be more convenient to use "Manual Channel Search" procedure when you want to search
channel for a specified transponder offered from the satellite. As in Automatic Channel Search,
Manual Channel Search also searches all channels broadcasted over a specific
transponder using its predefined information. You can add a new transponder if you cannot
find it on the predefined transponder list.
Select "Channel Search" in "Installation Menu"and the following screen will be displayed.
= =
Select the Manual Search Mode from "Search Mode" field using the
= =
Press the
button .
= =
If you cannot find the desired transponder from the transponder list, you can add it by inputting
= =
appropriate parameter values for a new transponder in the corresponding item of numeric
number field.
When you want to change the parameter of an existing transponder, select the parameter
= =
using the volume button(
(Frequency, Symbol Rate, FEC, Polarity)
Press the
button to start the manual searching for the selected transponder.
= =
You can also search a channel of the specified transponder by specifying Video PID,
= =
Audio PID and PCR PID.
Enter PIDs of Video, Audio and PCR ( the value is decimal )
= =
Press the
button.
= =
Then the result will be save the data.
= =
Press the
= =
and return to the viewing mode.
Press F1 to delete all TPs one by one except the first TP and the last TP(add TP) of the current
= =
satellite.
23
) and change its value.
button to return to the previous menu. Press the
button.
button to exit this menu
Advertisement
Table of Contents
