Safeq Configuration - Ysoft SafeQ Ethernet Reader Administrator's Manual

4

SAFEQ CONFIGURATION

After the Ethernet Reader is properly configured, it must be connected to the YSoft SafeQ®.
Assume that the YSoft SafeQ® server and YSoft SafeQ® Device Server are already installed and running. Once
the YSoft SafeQ® Device Server is installed and connected to the YSoft SafeQ® server, the secure queue exists in
the SafeQ.
1. Authenticate into SafeQ as administrator.
2. Select the secure queue automatically created by the YSoft SafeQ® Device Server (see Picture 6):
Queues and devices > Queues and terminals
3. Insert the serial number of the Ethernet Reader into the SN/IP field (see Picture 7).
YSOFT SAFEQ® ETHERNET READER – ADMINISTRATORS GUIDE V1.3 [EN]
Picture 6 - Queue configuration
6.12.2010
11/17