Advertisement
Table of Contents
Features
Model: KT1720
Voltage Ranges: 12-50-110-230-
400V AC/DC
Separate lamps indicate AC or DC
with polarity
Built to CAT IV 600V safety
standards
Conforms to UK HSE GS 38
Double insulated lead 1.4 metres
Safety resistors in the passive
probe end make it safe in single
fault, if the probe connecting wire
gets trapped
Conforms to EN 61010 and
BS EN 61243-3:2010 standards
No batteries required
Specifications
Voltage Ranges: 12-50-110-230-400V
AC/DC
EN 61010 CAT IV 600V safety standards
Double Insulated
Conforms to UK HSE GS 38
Complies with BS EN 61243-3:2010 and
BS EN 61326-1:2010 standards
WARNING
Do not use it in a way not specified
by the manufacturer or the safety
is not assured.
To ensure the safety of personnel working
on electrical circuits, BEST PRACTICE
calls for the use of a proving unit before
working on dead circuits.
Retain these instructions for future reference
kewtechcorp.com
KT1720
Two Pole Voltage Tester
With clear LED indication
Instructions
kewtechcorp.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Kewtech KT1720
Summary of Contents for Kewtech KT1720
- Page 1 KT1720 Features Model: KT1720 Two Pole Voltage Tester Voltage Ranges: 12-50-110-230- 400V AC/DC With clear LED indication Separate lamps indicate AC or DC with polarity Instructions Built to CAT IV 600V safety standards Conforms to UK HSE GS 38 Double insulated lead 1.4 metres...
- Page 2 Doing so may impair the protection provided by the tester. Using the tester The KT1720 voltage tester has been designed to be easy to use and give a clear indication of the voltage present. Firmly place the contact tips of the two probes on the voltage source being measured.
Need help?
Do you have a question about the KT1720 and is the answer not in the manual?
Questions and answers