Kodak M240 User Manual page 6

Quick Start Up
Monitor
Your monitor and camera were linked during manufacture.
The monitor operates only when the rechargeable battery pack is installed. After
installing the battery pack, you can operate the monitor using the battery pack or
with the AC adapter.
NOTE: To maximize battery life, charge the battery pack for 3 hours before first use. You can operate the
monitor using the AC adapter during charging.
1 Select a convenient location for the monitor and dock that also provides optimal
viewing (a table near your chair or sofa, for instance).
2 Slide the battery compartment cover to remove it.
3 Insert the battery pack connector into the socket, then insert the battery pack.
4 Close the battery compartment cover.
5 Connect the AC adapter with the shorter cord to the back of the monitor.
3
www.kodak.com/go/support