Kodak M240 User Manual page 14

Table of Contents

Advertisement

Quick Start Up
Sub-menus
Brightness—Press
to adjust the brightness of your monitor image, then press
OK.
Camera Delete—While in Camera Delete, press OK. Press
to select a camera
to delete, then press OK.
NOTE: If you only have one camera, you cannot delete it.
Power Saving—You can turn off the LCD to save power. Press
to select 30
Seconds, 5 minutes, 30 minutes, or OFF. Press OK to return to the main menu.
Voice Activation (VOX)—The monitor screen turns on when a preset sound level is
detected from the camera for more than 10 seconds. If the detected sound drops
below the preset sound level, the monitor turns off after 15 seconds. Press
to
activate. The last setting is saved. Press OK to return to the Main menu.
SD Card—If an SD card is installed in the monitor, an icon
appears in the main
menu. Press
to select the icon, then press OK. To format the SD Card,
select
again, then select OK. After formatting is complete, the main menu
appears.
CAUTION:
Formatting deletes all information stored on the SD card.
11
www.kodak.com/go/support

Advertisement

Table of Contents
loading

Table of Contents