Camera Select - Kodak M240 User Manual

Linking additional cameras to your monitor
Your camera and monitor were linked during manufacture.
To purchase additional cameras and approved accessories such as a charging dock for
your monitor, go to the KODAK Store (www.kodak.com/go/accessories).
Linking button

Camera Select

You can view video from the selected camera or from all cameras in sequence. The
default monitor setting displays video from each linked camera for up to 10 seconds
in sequence. To change to a different camera manually, press
then press OK.
www.kodak.com/go/support
To link additional cameras:
Use a paper clip to press and hold the linking button on
1
the back of the additional camera for more than 2
seconds (a white LED on the camera blinks twice per
second for 10 seconds).
Press and hold the OK button on the monitor for more
2
than 3 seconds (a linking icon appears on the LCD). After
camera No. 2 is successfully linked, the display will show
the image from the camera.
The image on the monitor switches from camera No. 2 to
camera No. 1 after 10 seconds.
NOTE: Repeat the procedure to link up to 4 cameras.
Quick Start Up
to select a camera,
8