Samsung I.C.E. PAD RH269LBSH Owner's Manual And Installation page 51

USER INTERFACE
Setting.
Screen
- This menu displays the I.C.E. PAD user screen properties including brightness, touch point settings and
power saving time settings.
[Main screen]
How to control screen brightness
1. Choose the "Settings" icon on the main screen, and then it will change to Screen.
2. Control the screen brightness using the "
- To apply your new settings, press "Apply" button(
- Power saving mode : The I.C.E. PAD screen turns off, but the I.C.E. PAD remains on.
- If you choose midnight off mode, the I.C.E. PAD screen turns off from 1:00 to 5:00AM.
NOTE
[Touch point reset mode]
[Setting-Screen mode]
" button.
).
How to set power saving time.
- In this mode, you can set a time for the screen to shut off after the
last button press. This helps to save power.
1. Press the "Change" button (
displayed.
2. Choose the desired time. (After 1hr, After 30min, After 10min, After
5min, After 3min, Always on, Midnight off)
- The default setting is always on.
3. To apply your new settings, press "Apply" button (
How to calibrate the touch point
- This function can be used to calibrate the stylus pen touch point to
improve usability with the Touch screen.
1. Press the "Touchpoint" button (
appear with pointer instructions on the top.
2. Hold the pen softly and press down lightly on the center of the
"+"mark. Repeat as the "+" mark moves on the screen.
3. To save the new calibration data, touch the LCD screen within 30
seconds.
- To keep the current setting, wait for 30 seconds.
51
), and then a pop up window is
).
), and then a screen will