Assemble The Flex Door; Adjusting The Level; Disassemble The Freezer Drawer - Samsung RF4267HA User Manual

ASSEMBLE THE FLEx DOOR

To reattach the flex doors after you have moved the
fridge to its final location, assemble parts in reverse order.

DISASSEMBLE THE FREEzER DRAWER

1. Take out the
upper drawer
by lifting it up.
2. Remove the freeze room guard ( 1 ) by lifting the
guard up.
3. Take out the lower
basket ( 3 ) by
lifting the basket
up from the rail
system.
4. Remove 4 hex
head bolts from
both sides with
a socket wrench
(10mm).
5. Lift up the freezer
door from the rails.
ASSEMBLE THE FREEzER DRAWER
To reattach the drawer after you have moved the fridge
to its final location, assemble parts in reverse order.
08_ setting up

ADjuSTING THE LEvEL

Make sure the refrigerator is level so that you can
make final adjustments. Use a level to test if the
refigerator is level both side to side and back to front. If
the refrigerator is not level, it will not be possible to get
the doors perfectly even, which may cause moisture
condensation and increased energy bills. Below is an
example of how to level the refrigerator if the left side
of the refrigerator is lower than the right side.
1
3
cAuTION
MAkING MINOR ADjuSTMENTS
BETWEEN DOORS
Remember, a leveled refrigerator is necessary for
getting the doors perfectly even. If you need help,
review the previous section on leveling the refrigerator.
How to adjust the level
Insert a flat-blade screwdriver (-) into a notch on the
left control lever, and turn it count clockwise to level
the refrigerator. (You turn the lever clockwise to lower
the refrigerator and counterclockwise to raise it.)
flat-blade screwdriver(-) control Lever
Both control levers must be touching the floor
to avoid possible personal injury or property
damage because of tipping.
If the right side is lower, perform the same
procedure, but with the right control lever.
It is difficult to remove the cover leg front from
the refrigerator, so we do not recommend
making small adjustments wIth the control
lever. Instead, refer to the next page for the
best way to make minor adjustments to the
doors.