Disassemble The Flex Door; Reattaching Refrigerator Doors - Samsung RF4267HA User Manual

1
2. Disconnect one connector ( 3 ) on the right side
door and one connector ( 4 ) on left side door. To
remove the water coupler from the hinge, twist
and pull it from the hinge. Remove the water line
( 5 ) while pressing the marked part ( 6 ) of the
water line coupler.
If a red clip is on the coupler, it must be
removed before removing the tube.
cAuTION
4
Red clip
(1/4")
5
6
3. Pull and remove the hinge lever ( 7 ) . Remove the
ground screw ( 8 ) attached to the upper left and
right door hinges with a philips screwdriver (+).
Remove the upper left and right door hinges ( 9 ).
7
9
4. Lift the door straight
up to remove.
5. Remove the screw ( 10 ) attached to the lower
2
REATTAcHING THE REFRIGERATOR
DOORS
To reattach the fridge doors after you have moved the
fridge to its final location, assemble parts in reverse order.

DISASSEMBLE THE FLEx DOOR

1. Take out the Flex
3
2. Take off the cover
3. Disconnect the housing
8
4. Remove 2 hex head
5. Lift up the Flex door from
left and right
door hinges
with a philips
12
10
screwdriver (+).
11
Remove the 2
hex head bolts
( 11 ) attached
to the lower left
Allen wrench
and right door
hinges with an allen wrench (3/16"). Remove the
lower left and right door hinges ( 12 ).
Zone ( 1 ) by lifting
it up.
( 2 ) w/harness
with a flat-blade
screwdriver (-).
connector.
bolts from sides with
a socket wrench
(10mm).
the rails.
1
2
setting up _07