Assemble The Flex Door; Assemble/Disassemble Freezer Drawer; Adjusting The Doors; Making Minor Adjustments Between Doors - Samsung Refrigerator User Manual
Hide thumbs
Also See for Refrigerator:
- User manual (180 pages) ,
- Owner's manual (40 pages) ,
- Owner's manual and installation (32 pages)
Table of Contents
Advertisement
ASSEMblE THE FlEx dOOR
To reattach the flex door,assemble parts in reverse
order.
dISASSEMblE THE FREEZER
dRAWER
1. Push the upper drawer in completely.
2. Remove the tilting pocket ( 1 ) by pulling on both
brackets ( 2 ) upward at the same time.
1
2
3. Take out the lower basket ( 3 ) by lifting the
basket up from rail system.
3
4. Remove four 10mm hex-head bolts from both
sides.
5. Lift the freezer door up from the rails.
ASSEMblE THE FREEZER
dRAWER
To reattach the freezer drawer, assemble parts in
reverse order.
AdJUSTING THE dOORS
Now that the doors are back on the Refrigerator, you
want to make sure the Refrigerator is level so that
you can make final adjustments. If the Refrigerator
is not level, it will not be possible to get the doors
perfectly even.
Insert a flat-blade screwdriver (-) into a notch on the
left control lever, and turn it count clockwise to level
the refrigerator. (You turn the lever clockwise to lower
the refrigerator and counterclockwise to raise it.)
flat-blade
Control
screwdriver(-)
lever
Both control levers must be touching the floor
to avoid possible personal injury or property
CAUTION
damage because of tipping.
If the right side is lower, perform the same
procedure, but with the right control lever.
MAKING MINOR AdJUSTMENTS
bETWEEN dOORS
Remember a level Refrigerator is necessary for
getting the doors perfectly even. If you need
help, review the previous section on leveling the
Refrigerator.
setting up _09
Hide quick links:
Advertisement
Table of Contents
