DA68-01174A
12/13/02 12:57 PM
ADJUST THE CLEARANCE BETWEEN THE DOORS
Making small level adjustments between doors.
If the door of the freezer is lower than that of the
refrigerator.
Adjustment location
Please open the doors and adjust the doors as follows:
1) Release the nut ( ) on the lower hinge until the upper end of the bolt ( ).
When you release the nut( ), use enclosed hex wrench ( ) to turn the bolt( ) a little counter-
NOTE
clockwise. Loosen the nut( ) with your finger.
WRENCH
NUT
BOLT
2) Please adjust the height difference between the doors turning the bolt ( ) clockwise(
(
).
When you turn clockwise (
NOTE
WRENCH
BOLT
3) After adjusting the doors, turn the nut ( ) clockwise(
bolt again with the wrench ( ) to fix the nut( ).
NUT
If you do not fix the nut ( )firmly, the bolt ( ) may be released.
NOTE
Page 26
), the door goes up.
WRENCH
BOLT
If the door of freezer is higher than that of the
refrigerator.
NUT
) until the lower end of the bolt, then tighten the
NUT
26
Adjustment location
WRENCH
BOLT
) or counter clockwise
WRENCH
BOLT
WRENCH
BOLT