Table of Contents
Advertisement
DA68-01174A
12/13/02 12:58 PM
INSTALLING AND STARTING THE HomePAD
Unfold your HomePAD
stretch stand (When not using
HomePAD
net) and pull out its stand.
Stand
Press the power button of HomePAD
The Display lamp status according to system conditions
Power Display Lamp
Lamp Blinking
Lamp blinking fast
• When power is on, power and network display lamp will blink. System will initialize in 20
seconds. Touch Screen to correct touch point will display.
Please follow the Touch Screen instruc-
tions to correct its response system.
• This option screen appears only for initial
start-up.
• Press the screen point in sequence: 1->2-
>3->4->5(refer to UI Manual Screen setting),
This option only appears during initial startup.
• This process corrects the touch screen when
it is not responding to your screen input.
• Press each point on the LCD screen lightly
with the input pen to correct the Touch
Screen.
Page 54
TM
on the
TM
on the refrigerator cabi-
Network Display
Lamp
Lamp On
-
Lamp On
On
Blinking
Lamp On
Off
Fast
Off
Lamp off
Blinking Fast
Connect the power cables
• Connect AC adapter to the HomePAD
• Connect AC plug to wall outlet
Outlet
TM
Remark
Adapter Power is on and the battery is fully
recharged.
System and network are working properly
System working normally but wireless network
not working
System is in power off mode
Adapter power is off and the battery is discharged
Rebooting after power off
After Screen setting, Logging_In Process
will start.(refer to UI Manual Logging_In
process)
• This option only appears during initial start-up
54
TM
TM
.
Advertisement
Table of Contents
