IAG -ENG-5003BK Instructions

IAG Clutch Reservoir Cap
Part# IAG-ENG-5003BK / BL / RD / SL
Tools Required: Pick / Small Flat Head Screw Driver
Thank you for choosing IAG Performance. The clutch
reservoir cap is designed to be a direct fit on the OE
Subaru clutch reservoir. CAD modeled and CNC machined,
this piece is designed to brighten your engine bay and
provide a strong and rigid replacement to the stock cap
that often deteriorates and distorts due to time and age.
The only assembly required is removing the inner seal
from your stock cap and re-inserting it into the billet cap.
Please follow the instructions below for an easy installation.

Removal:

Use a small pick or flat head screw driver to pry around the
edge of the underside of the stock cap. The stock cap has a
lip that holds the seal down. Carefully pull the lip back as
you work your way around the cap and the seal can be
removed from the cap.
2.
IAG Performance | 1203 Baltimore Blvd. Westminster, MD 21157 | Ph: 410-840-3555 | www.iagperformance.com
1.
3.
1