IAG -ENG-5014BK Instructions

IAG Battery Tie Down
Part# IAG-ENG-5014BK / BL / RD / SL
Tools Required: 10mm wrench / 10mm Deep Socket (1/4"
drive preferred) / ratchet
Contents:
Tie Down (x1)
6mm Zinc Coated Flange Nuts (x2)
Short J-hook (x1)
Long J-hook (x1)
Thank you for choosing IAG Performance. The battery tie
down is designed to secure a group 35 sized battery in
your engine bay and pay homage to the boxer engine.
Supplied with your tie down are new j-hooks and flange
nuts. Our tie down was tested utilizing several group 35
batteries from different manufactures. Your OEM battery
or OEM replacement battery should closely match the
dimensions listed below:
L=9" / W=6.875" / H=8.75"
Please follow the instructions below for an easy
installation.
Removal:
1. Using your 10mm wrench, disconnect the negative
battery terminal.
1.
IAG Performance | 1203 Baltimore Blvd. Westminster, MD 21157 | Ph: 410-840-3555 | www.iagperformance.com
1