Table of Contents
Advertisement
Configuring NTP
The TSS-2470 Time Delay GUI is used to set the time zone and to enter the networking
parameters.
Selecting the Time Zone
Starting at the main menu bar, Click Edit->Configure->Date-Time screen. When "Automatic
Updates" is not checked, the Region and Zone lists are enabled. Select your region and then the
zone within that region. There may be more than one way to your zone; America/New York, for
example, is the same as US/Eastern. Click the APPLY button to activate the settings.
After changing the time zone a Full Restart must be performed before changes become
effective.
Figure 1 - NTP Network Block Diagram
Operations 31
Advertisement
Table of Contents
