360 Systems TSS-2470 II Operation Manual page 28

Note: When URLs (non-numeric site address such as pool.ntp.org) are used in the NTP Servers
field, the IP address of at least one DNS (Domain Name server) in the Name Servers field must
be provided. Typically, this address is supplied by your Internet Service Provider.
These name servers translate URL names into numeric IP addresses needed to access the sites in
question.
When using a GPS-based time server which is connected directly to a local area network, enter
its numeric IP address (such as 192.168.1.60) into the NTP Servers field, leaving the Name Servers
field blank.
Also, if the numeric IP addresses of the public or corporate time servers on the Internet is known,
these addresses can be entered, separated by spaces, in the NTP Servers field, leaving the Name
Servers field blank, since there would be no URLs to be resolved.
Note: Not all time servers allow unlimited public access. Refer to www.ntp.org for more
information.
Click the APPLY button to save your changes.
FTP User and Password
In order to obtain log files from the server for use when troubleshooting technical
issues, you may FTP to the server from a remote computer. Setting the user name and
password adds a layer of security so that accidental or unauthorized access to the
server is not permitted.
File Share Service User and Password
The second method of obtaining log files from the server is to access the server from a
file share via a remote computer. To enable the file share on the server, check the
Enable File Share box and set a password. The user name is locked to
the user name and password adds a layer of security so that accidental or unauthorized
access to the server is not permitted.
28  TSS-2470 Time Delay
tssuser
. Setting