360 Systems TSS-2470 II Operation Manual page 24

Video Mode
Four radio buttons select the Video Mode, which includes the frame rate and video format.
These are:
This setting can only be changed when the TSS-2470 Time Delay is stopped. When it is
changed, the unit will display a warning and then automatically perform a quick restart to
initialize in the newly selected mode.
VANC Buffer Size
This field adjusts the amount of VANC data (such as Closed Captions) stored by the server.
Valid range is from 0KB per frame to 4KB per frame. Consult with 360 Systems technicians
before setting this to values higher than 4 KB/frame.
Output Timing
This controls the timing relationship of the output to the reference, which is the input video or
the genlock reference as set by the Frame
Synchronizer checkbox.
Note that these timing adjustments apply only to
the Delay output, not the Monitor output. The
monitor outputs are designed for confidence monitoring only, and are not timed.
In most applications these adjustments are not necessary. They are only used in environments
where the output must be adjusted to match other timed equipment, for example when using
a switcher or video mixer that requires precise timing alignment.
Both adjustments are made by using numeric entry from the keyboard or the Up and Down
Arrow buttons next to the parameter's numeric display.
24  TSS-2470 Time Delay