Table of Contents
Advertisement
Each TSS-2470 Time Delay is shipped with a unique default network Host Name and IP
Address. Update these configurations to suit your specific network environment. Factory
defaults for networking are:
Disable Network is checked
Use DHCP is unchecked
Disable Network Checkbox: This selection turns the network off or on. The default is Disable.
Host Name: (Any name will suffice, but since this name appears on each line of the TSS-2470
Time Delay's diagnostic logs, it is a good idea to keep this short.) The name should also be
unique from other devices on the network.
If "Use DHCP" if not checked, then enter a fixed IP address compatible with your local subnet.
For example,
Do not use these examples unless you know that they are appropriate, as addressing errors
can cause problems for the entire network. If you are in doubt consult with your IT specialist.
The Name Servers and NTP Servers fields provide the information needed to reach the public
time servers. Note that NTP and the System Time in no way affects the accuracy of the Time
Delay.
The NTP Servers field contains a list of time servers, either by numeric IP address, or by site
name (URL). Entries are separated by spaces.
The nonprofit Internet Systems Consortium, Inc. (ISC) maintains sites that automatically return
lists of public time servers to an NTP client such as the server. Hence, the NTP Servers field is
initially filled in with the URL's for these sites (0.pool.ntp.org, for example). Of course, this list with
the addresses of specific time servers you may want to use can be overwritten. However, any
attempt to clear the NTP Servers field will reset it to the default list.
IP Address:
Net Mask:
Default Router:
192.168.1.20
255.255.255.0
192.168.1.1
Operations 27
Advertisement
Table of Contents
