Connecting A Camcorder; Connecting A Dvd Player - Samsung HLN4365W Instruction Manual

BP68-00142A-2 5/27/03 10:09 AM Page 24
Connections

Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a camcorder to your TV.
You can use your camcorder to view tapes without using a VCR.
Locate the A/V output jacks
1
on the camcorder. They are
usually found on the side or
back of the camcorder.
Connect an audio cable
2
between the AUDIO OUT-
PUT jack on the camcorder
and the AUDIO terminals
on the side of the TV.
If your camcorder is stereo,
you must connect two sepa-
rate cables.
(The audio cables are usual-
ly included with the cam-
corder.)
Connect a video cable
3
between the VIDEO OUT-
PUT jack on the camcorder
and the VIDEO terminal on
the side of the TV. (A video
cable is usually included
with the camcorder.) To
watch a tape, follow your
camera's instructions and
the section on "Viewing an
External Signal Source" in
this manual.
24

Connecting a DVD Player

The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
Connecting to Y,P ,P
b r
Connect a set of audio
1
cables between the
Component1AUDIO IN
jacks on the TV and the
AUDIO OUT jacks on the
DVD player.
To enable Component video
2
viewing, connect video
cables between the
Component1 (Y, P and P )
b r
jacks on the TV and Y, P
b
and P (or Y, C , C ) output
r b r
jacks on the DVD player.
Note: For an explanation of
Component video, see your
DVD player's owner's man-
ual.
Connecting to audio and video jacks
Connect a set of audio
1
cables between the AUDIO
IN jacks on the TV and the
AUDIO OUT jacks on the
DVD player.
Connect video cables
2
between the VIDEO OUT
jack on the DVD player and
the VIDEO IN jack on the
TV.
25